From: Spencer R. <sry...@gm...> - 2017-12-29 02:56:54
|
I would just factory reset everything (at a minimum the PLM) and then have misterhouse resync all links. I've seen this before that seemed like a good old fashioned reset fixed everything. On Sat, Dec 23, 2017 at 9:18 AM, john <jo...@to...> wrote: > Over the years I have had many Insteon devices that failed and needed to > be replaced. I never thought too much about removing the old references > from the PLM and simply removed them from the mht file. This has created > one orphan that mh references when I use a particular scene. This orphan > not stopping things from working but I would like to get rid of it. > > Typical log entry when scene is used: > > 12/23/17 01:53:48 PM [Insteon::BaseObject] $ht_scene1::set(on, ) > 12/23/17 01:53:50 PM [Insteon_PLM] Received all-link cleanup failure from > an unkown device id: 0f0bb5 and for all link group: 05. You may want to run > delete orphans to remove this link from your PLM > 12/23/17 01:53:56 PM [Insteon_PLM] Received all-link cleanup success: > obj=$ht_scene1; command=on; extra=00 > > If I first do a "plm global - delete orphan links" no links are deleted. > > f I "PLM - scan PLM link table" the log output shows these references to > the device: > > 12/23/17 02:00:08 PM [Insteon::ALDB_PLM] responder record to 0F.0B.B5(01) > (d1=00, d2=00, d3=00) > 12/23/17 02:00:08 PM [Insteon::ALDB_PLM] cntlr($ht_scene1 (05)) record to > 0F.0B.B5 (d1=01, d2=00, d3=05) > 12/23/17 02:00:08 PM [Insteon::ALDB_PLM] cntlr($ht_scene2 (06)) record to > 0F.0B.B5 (d1=01, d2=00, d3=06) > > Now when I do another "plm global - delete orphan links" it shows 10 > deletes. Here are just the references to this device. It sees it as an > orphan but the delete fails: > > 12/23/17 02:03:40 PM Running: plm global - delete orphan links > 12/23/17 02:03:40 PM [Insteon::ALDB_PLM] #### NOW BEGINNING DELETE ORPHAN > LINKS #### > > [snip] > > 12/23/17 02:03:40 PM [Insteon::AllLinkDatabase] Deleting the following > link on $plm because no device with deviceid: 0f0bb5 could be found > data3 = 06; group = 06; is_controller = 1; deviceid = 0f0bb5; > > 12/23/17 02:03:40 PM [Insteon::AllLinkDatabase] Deleting the following > link on $plm because no device with deviceid: 0f0bb5 could be found > group = 05; is_controller = 1; data3 = 05; deviceid = 0f0bb5;12/23/17 > 02:03:40 PM [Insteon::AllLinkDatabase] Deleting the following link on $plm > because no device with deviceid: 0f0bb5 could be found > is_controller = 0; group = 01; data3 = 00; deviceid = 0f0bb5; > > 12/23/17 02:03:40 PM [Insteon::AllLinkDatabase] ## Begin processing delete > queue for: $plm > 12/23/17 02:03:40 PM [Insteon::ALDB_PLM] now deleting orphaned link w/ > details: controller(06), deviceid=0f0bb5, group=06 > 12/23/17 02:03:40 PM [Insteon_PLM] WARN: PLM unable to complete requested > PLM link table update (delete record) for group: 06 and deviceid: 0f0bb5 > > 12/23/17 02:03:41 PM [Insteon::ALDB_PLM] now deleting orphaned link w/ > details: controller(05), deviceid=0f0bb5, group=05 > 12/23/17 02:03:41 PM [Insteon_PLM] WARN: PLM unable to complete requested > PLM link table update (delete record) for group: 05 and deviceid: 0f0bb5 > > 12/23/17 02:03:41 PM [Insteon::ALDB_PLM] now deleting orphaned link w/ > details: responder, deviceid=0f0bb5, group=01 > 12/23/17 02:03:42 PM [Insteon_PLM] WARN: PLM unable to complete requested > PLM link table update (delete record) for group: 01 and deviceid: 0f0bb5 > > 12/23/17 02:03:42 PM [Insteon::ALDB_PLM] Delete All Links has Completed. > 12/23/17 02:03:42 PM [Insteon::ALDB_PLM] However, some failures were noted > with the following devices: > 12/23/17 02:03:42 PM [Insteon::ALDB_PLM] A total of 10 orphaned link > records were deleted. > 12/23/17 02:03:42 PM [Insteon::ALDB_PLM] #### END DELETE ORPHAN LINKS #### > > Note: The full logs (which can provide if they help) is a graveyard of > devices that have went bad. > > Sure enough, orphan is still there: > > 12/23/17 02:12:18 PM [Insteon::BaseObject] $ht_scene1::set(on, ) > 12/23/17 02:12:20 PM [Insteon_PLM] Received all-link cleanup failure from > an unkown device id: 0f0bb5 and for all link group: 05. You may want to run > delete orphans to remove this link from your PLM > 12/23/17 02:12:23 PM [Insteon_PLM] Received all-link cleanup success: > obj=$ht_scene1; command=on; extra=00 > > I have tried adding this device back in to the mht however I can't work > with it in a way that removes it (for example, unlink it) as it appears the > physical device is needed to do that. The log entries reference device > with three different groups. > > Any idea how I can fix this? > > Thanks, > > John > > > ------------------------------------------------------------ > ------------------ > Check out the vibrant tech community on one of the world's most > engaging tech sites, Slashdot.org! http://sdm.link/slashdot > ________________________________________________________ > To unsubscribe from this list, go to: https://lists.sourceforge.net/ > lists/listinfo/misterhouse-users > > |