Re: [mh] Automatically reconnect after USB Insteon PLM disconnected?

[Kevin R. K. <ke...@kr...>]

I think all of these things are correct.

The problem is that I don't see anything in MisterHouse that suggests it
was designed to handle reconnecting a serial port.  I also don't see
anything in Device::SerialPort for testing if a serial port is still alive.


On Tue, Apr 8, 2014 at 7:22 AM, Jeff Siddall <ne...@si...> wrote:

> On 03/18/2014 06:43 PM, Kevin Robert Keegan wrote:
> > On Tue, Mar 18, 2014 at 2:01 PM, Jeff Siddall <ne...@si...
> > <mailto:ne...@si...>> wrote:
> >
> >     The reconnect issue is not entirely gone as a power outage will
> >     disconnect the PLM (which is not on the UPS) but not my misterhouse
> >     machine (which is on a UPS).  This will still result in an unusable
> PLM
> >     after the power is restored :(
> >
> >
> > Hmm, well I would hope that this would be rare enough that a scripted
> > restart of MH would be sufficient for you.
>
> One more update: I disconnected the PLM briefly from power (leaving the
> USB port connected) to diagnose another issue and MH  did not reconnect
> after I plugged it back in.  Seems like there must be a timing related
> issue with the power going off.
>
> Jeff
>
>
> ------------------------------------------------------------------------------
> Put Bad Developers to Shame
> Dominate Development with Jenkins Continuous Integration
> Continuously Automate Build, Test & Deployment
> Start a new project now. Try Jenkins in the cloud.
> http://p.sf.net/sfu/13600_Cloudbees
> ________________________________________________________
> To unsubscribe from this list, go to:
> https://lists.sourceforge.net/lists/listinfo/misterhouse-users
>
>