From: Garry D. <gar...@sh...> - 2012-01-09 19:10:26
|
Hi Andy Yes I've noticed this lag too. I'm not using occupancy settings that are mission critical so it doesn't bother me that much. I do have a motion sensor under my deck that Misterhouse turns on a light if there's motion after dark. I've never tried to investigate the reason for the delay either. Regards, Garry -----Original Message----- From: Andy McCallum [mailto:myi...@st...] Sent: Friday, Jan 6, 2012 10:34 PM To: gar...@sh...; The main list for the MisterHouse home automation program Subject: Re: [mh] CADDX alarm integration Hi Bart & Garry, I too have a NX-8E alarm panel (down in Australia). I have it successfully connected to MH but only reporting events. I haven't tried disarm/arm. Garry asked about using it's sensors as occupancy detection. I have been doing this in a limited way. My problem has become the delay between actual occupancy and the NX-8E reporting the motion from the sensor. The delay is 1-2 seconds. A long time for a "non-technical person" to walk in the dark. Has anybody had this annoyance? I have assumed it is just the nature of alarm sensors but have not (yet) investigated further. Andy. On 05/01/12 03:34, Garry Doucette wrote: > Hi Bart > > I've got my system communicating with my NX-8E alarm panel. I used the > info here to get started. > > http://wiki.linuxmce.org/index.php/Caddx_NX-8E > > And here is a snip from my items.mht file: > > #CADDX Items > ZONE, 1, Office_Door, hidden > ZONE, 2, Office_Motion, hidden > ZONE, 3, Office_Glass_Break, hidden > ZONE, 4, Basement_Door, hidden > ZONE, 5, Mailbox, hidden > ZONE, 6, Under_Deck_motion, hidden > ZONE, 7, Driveway_motion, hidden > ZONE, 8, Deck_Door, hidden > ZONE, armed_partition1, caddx_armed > ZONE, stay_partition1, caddx_stay > > Here is the startup script that gets it going. > > /etc/init.d/caddx > > #!/bin/sh > > cd /opt/misterhouse/mh/code/public > perl caddx.pl --com_port=/dev/ttyUSB3 > exit 0 > > I don't arm or disarm the system using Misterhouse but the I use the > sensors extensively. > > Regards, > > Garry > > -----Original Message----- > From: Bart Bunting [mailto:ba...@ur...] > Sent: Tuesday, Jan 3, 2012 2:53 PM > To: mis...@li... > Subject: [mh] CADDX alarm integration > > Hi Everyone, > > I am thinking about integrating my NX-16 alarm into my home automation > setup. > > > From a quick browse of the caddx.pm module it appears that the code > > is > purely for listening to events. > > My questions are: > - Has anyone also managed to get arm/disarm functionality working? > - How well do the sensors work for occupancy detection? > - Is anyone using the ethernet module? I think it's the NX-590. > > Any information would be most helpful. > > Kind regards > > Bart > > ---------------------------------------------------------------------- > ------ > -- > Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a > complex infrastructure or vast IT resources to deliver seamless, > secure access to virtual desktops. With this all-in-one solution, > easily deploy virtual desktops for less than the cost of PCs and save > 60% on VDI infrastructure costs. Try it free! > http://p.sf.net/sfu/Citrix-VDIinabox > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > > > ---------------------------------------------------------------------- > -------- Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't > need a complex infrastructure or vast IT resources to deliver > seamless, secure access to virtual desktops. With this all-in-one > solution, easily deploy virtual desktops for less than the cost of PCs > and save 60% on VDI infrastructure costs. Try it free! > http://p.sf.net/sfu/Citrix-VDIinabox > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > > > |