From: David N. <dno...@ya...> - 2011-01-31 02:48:21
|
and what versions of perl are on the two systems? would you do an svn update and test Jim Duda's fix to Device Item and see if your startup errors go away? If you are not setup for svn, i can send you the Device_Item.pm file. David On 1/30/2011 5:02 PM, Ron Blout wrote: > No I do not have 4 X10MS devices defined in an mht file. I do however have > an > X10_Sensor item defined in one of my cust scripts/code. Just one. Not 4. > > "David Norwood"<dno...@ya...> wrote in message > news:4D4...@ya...... >> Sorry moving the cm11a didn't help. What are the perl versions on the >> two systems? I think David S. is on the right track. X10MS in a mht >> file get converted to X10_Sensor item. Do you have 4 of those? >> >> Misterhouse should set the serial parameters. You might try installing >> the latest version of Device::SerialPort from cpan or yum, and remove >> mh/lib/site/Device/SerialPort.pm so it's used. >> >> David >> >> >> On 1/25/2011 9:32 AM, Ron Blout wrote: >>> Tried you suggestion about moving the CM11A to the new machine but it did >>> not make a differnece - >>> the errors continued. >>> Thought I would restart mh on the 32 bit machine without the CM11A to see >>> if >>> it now experienced the >>> same error. It did not - no errors. Tried a virgin install on new >>> machine, >>> i.e., no custom code, still get the same errors. I just cant believe >>> this >>> is 64 bit related. Could it be serial port related. I am seeing the >>> following for the serial port: >>> >>> >>> setserial -g /dev/ttyS* >>> /dev/ttyS0, UART: 16950/954, Port: 0xe800, IRQ: 17 >>> /dev/ttyS1, UART: 16950/954, Port: 0xe480, IRQ: 17 >>> /dev/ttyS2, UART: unknown, Port: 0xe080, IRQ: 17 >>> /dev/ttyS3, UART: unknown, Port: 0x02e8, IRQ: 3 >>> >>> dmesg | grep tty >>> [ 0.000000] console [tty0] enabled >>> [ 1.135831] ttyS0: detected caps 00000700 should be 00000100 >>> [ 1.135839] 0000:08:01.0: ttyS0 at I/O 0xe800 (irq = 17) is a >>> 16C950/954 >>> [ 1.135923] ttyS1: detected caps 00000700 should be 00000100 >>> [ 1.135930] 0000:08:01.0: ttyS1 at I/O 0xe480 (irq = 17) is a >>> 16C950/954 >>> >>> Does the above"look" right? Different on the 32 bit machine. has >>> "serial8250" pre-fixed to the ttyS0 and >>> ttyS1 lines. >>> >>> Does "mh" expect specific parameters for the serial port, i.e., baudrate, >>> parity, irq etc.? >>> >>> Ron >>> >> >> ------------------------------------------------------------------------------ >> Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! >> Finally, a world-class log management solution at an even better >> price-free! >> Download using promo code Free_Logger_4_Dev2Dev. Offer expires >> February 28th, so secure your free ArcSight Logger TODAY! >> http://p.sf.net/sfu/arcsight-sfd2d >> ________________________________________________________ >> To unsubscribe from this list, go to: >> http://sourceforge.net/mail/?group_id=1365 >> >> > > > ------------------------------------------------------------------------------ > Special Offer-- Download ArcSight Logger for FREE (a $49 USD value)! > Finally, a world-class log management solution at an even better price-free! > Download using promo code Free_Logger_4_Dev2Dev. Offer expires > February 28th, so secure your free ArcSight Logger TODAY! > http://p.sf.net/sfu/arcsight-sfd2d > ________________________________________________________ > To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 > > |