[mh] DS10/W800 issue

[Chris E. <chr...@gm...>]

Has anyone else seen this issue.  I have a few DS10 door sensors and I use a
w800 to receive the alerts.  But almost once a day I hit an issue where MH
thinks the door is open when it is actually closed.

Looking at the logs I see this when the door is opened :
25/10/2010 08:49:18  W800: raw data: b5ba04fb
25/10/2010 08:49:18  W800: reordered data: 20 df ad 5d
25/10/2010 08:49:18  w800: this is x10 security data
25/10/2010 08:49:18  W800: security: device_id = 0xad, cmd = 0x20
25/10/2010 08:49:18  W800: security: class_id = sensor, item_id = ad, state
= AlertMin
25/10/2010 08:49:18  ad: mudroom_door set AlertMin
25/10/2010 08:49:18  Door_Item($l_mudroom_door)::set(alertmin,
RF_Item=HASH(0x3bd37f8)): $mudroom_door was set by rf


But then when the door is closed for some reason I see the closed message
just prior to another open message, and then the state of the door will
remain open :
25/10/2010 08:49:23  W800: raw data: b5ba847b
25/10/2010 08:49:23  W800: reordered data: 21 de ad 5d
25/10/2010 08:49:23  w800: this is x10 security data
25/10/2010 08:49:23  W800: security: device_id = 0xad, cmd = 0x21
25/10/2010 08:49:23  W800: security: class_id = sensor, item_id = ad, state
= NormalMin
25/10/2010 08:49:23  ad: mudroom_door set NormalMin
25/10/2010 08:49:23  Door_Item($l_mudroom_door)::set(normalmin,
RF_Item=HASH(0x3bd37f8)): $mudroom_door was set by rf
25/10/2010 08:49:24  W800: raw data: b5ba04fb
25/10/2010 08:49:24  W800: reordered data: 20 df ad 5d
25/10/2010 08:49:24  w800: this is x10 security data
25/10/2010 08:49:24  W800: security: device_id = 0xad, cmd = 0x20
25/10/2010 08:49:24  W800: security: class_id = sensor, item_id = ad, state
= AlertMin
25/10/2010 08:49:24  ad: mudroom_door set AlertMin
25/10/2010 08:49:24  Door_Item($l_mudroom_door)::set(alertmin,
RF_Item=HASH(0x3bd37f8)): $mudroom_door was set by rf


I have logged many of these cases and not sure exactly what is going on.  We
use this door quite often so this gets quite annoying.

-- 
   Chris