[mh] RemoteLinc button cannot activate a PLM scene, can it?

[Eloy P. <pe...@ch...>]

Hello,

Based on what I have read this is not possible, but just want to make 
sure I am not missing something. I have:

------------------------------------
IPLL, 15.34.18:01, light_1, All_Lights, PLM
...
IPLL, 15.34.19:01, light_N, All_Lights, PLM

IPLL, PLM:11, all_lights_off, All_Scenes, PLM
SCENE_MEMBER, light_1, all_lights_off, 0%
...
SCENE_MEMBER, light_N, all_lights_off, 0%
------------------------------------

I cannot make a button on the RemoteLinc activate this "all_lights_off" 
scenes, can I? (Without glue code; with glue code I was able to do it, 
and an example of such glue code is provided in the INSTEON scenes page 
in the wiki.)

My confusion comes from the example in 
http://misterhouse.wikispaces.com/Insteon#Insteon%20Specific%20Info-Insteon%20setup%20in%20MH, 
which contains this:

------------------------------------
# you can list both targets, or a scene that lists boths
# you can't do this:
#SCENE_MEMBER, gar_both_scene, rlink_blk1_1, 100%, 2s
# you need to do that:
SCENE_MEMBER, gar_mast, rlink_blk1_1, 100%, 2s
SCENE_MEMBER, gar_slav, rlink_blk1_1, 100%, 2s
------------------------------------

The "you can list ... a scene that lists boths" is what confuses me, 
especially since in the next line it says "you can't do this" (referring 
to a scene that contains the two targets).

Is that a typo in the example in the wiki page and ", or a scene that 
lists boths" should be removed?

Thanks!

Eloy Paris.-