From: Jim S. <js...@sy...> - 2009-11-10 19:36:42
|
In fact there is no function in MrHouse to clear the memory so it is important that you use heyu to clear the macros - otherwise you will have some very strange behavior (the interface doesn't pass incoming X10 message to the serial interface if it knows how to respond to them due to a resident macro) - it will take you an age to determine what has gone wrong .... several people have been down that haunted (by macros past) house route before. Clear it while it's fresh in your memory to do so! -----Original Message----- From: Charles Sullivan [mailto:cws...@tr...] Sent: November 10, 2009 1:54 PM To: mis...@li... Subject: Re: [mh] Clearing Memory in a CM11 On Tue, 10 Nov 2009 12:26:50 -0500 Thom Paine <pai...@gm...> wrote: > I have been using my CM11 with heyu for a while now. Is there a > function in Mr. House to clear the memory in it so that I can have Mr. > House control everything? > > I'm just working on my transition to Mr. House and am going through > all the config. > > Thanks. Clear the memory with Heyu. Since Misterhouse doesn't use the CM11 memory you won't need to do it again. ---------------------------------------------------------------------------- -- Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july ________________________________________________________ To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 |