From: Derek W. <dr...@gm...> - 2009-03-23 12:41:04
|
Ok, so it's taken a while but I am getting somewhere with this. Seems I am now getting data from the serial port on the Omni to the MH server, but the data is not readable. If I enable serial debug on the MH server, I do see an entry in mh.log serial name=serial9 type=raw data2= and then a whole lot of NULs, the code responding to this sees it as NUL. My mh.private.ini has the following:- serial9_port=/dev/ttyS0 serial9_baudrate=9600 serial9_handshake=none serial9_parity=none serial9_databits=8 serial9_stopbits=1 serial9_flowcontrol=none serial9_datatype=raw Any help would be greatly appreciated. Derek Walker wrote: > > Hello > > I would like to know from anyone, if they have managed to connect a > MisterHouse server to a HAI <http://www.homeauto.com/main.asp> Omni > Pro > II<http://www.homeauto.com/Products/HAISystems/OmniPro2/omnipro2_tech.asp>home > automation panel. > > I have this type of home automation panel, and am considering setting up a > MisterHouse server. That in it's self would be cool, but would offer me > little value, if I was not able to control my home automation. I would > preferably like to connect via the HAI Omni-Link protocol, but the > Pro-Link > messaging protocol would also be usable. > > Pro-Link uses ASCII messages via serial, so MisterHouse should be able to > link to the system, but I have not been able to find any basic serial > scripts, all examples seem to use X10, which I am finding difficult to > apply > to my needs. > > Even if somebody can point me in the right direction, would be great. > > Thanks > Derek > -- View this message in context: http://www.nabble.com/MisterHouse-to-HAI-Omni-Pro-II-Integration-tp19268452p22659353.html Sent from the Misterhouse - User mailing list archive at Nabble.com. |