From: John R. <jo...@wo...> - 2009-01-08 03:28:24
|
I would expect the following to turn on the light when motion was detected. This does not occur. Do I need to link the motion detector to the light in addition to the PLM? I expected MH to manage that association. From my items.mht: IPLL, 07.61.3E:01, hall, All_Lights|Upstairs, plm LIGHT, hall, hall_light IPLD, 11.8E.65, insteon_laundry_motion_sensor, Sensors, plm, 1001 MOTION, insteon_laundry_motion_sensor, laundry_motion_sensor insteon.pl: $hall_light->add($laundry_motion_sensor); Log: 01/07/09 07:53:31 PM [Insteon_PLM] Parsing serial data: 0250118e65000001 01/07/09 07:53:31 PM [Insteon_PLM] Prepending prior data fragment: 0250118e65000001 01/07/09 07:53:31 PM [Insteon_PLM] Parsing serial data: 0250118e65000001c71101 01/07/09 07:53:31 PM [Insteon_Device] command:11; type:alllink; group: 01 01/07/09 07:53:31 PM [Insteon_Device] found: on 01/07/09 07:53:31 PM [Insteon_PLM] Processing message for $insteon_laundry_motion_sensor 01/07/09 07:53:31 PM [Insteon_PLM] Parsing serial data: 0250118e65000001c71101 01/07/09 07:53:31 PM [Insteon_Device] command:11; type:alllink; group: 01 01/07/09 07:53:31 PM [Insteon_Device] found: on 01/07/09 07:53:31 PM [Insteon_PLM] Processing message for $insteon_laundry_motion_sensor 01/07/09 07:53:34 PM [Insteon_PLM] Parsing serial data: 0250118e650937cf 01/07/09 07:53:34 PM [Insteon_PLM] Prepending prior data fragment: 0250118e650937cf 01/07/09 07:53:34 PM [Insteon_PLM] Parsing serial data: 0250118e650937cf411101 01/07/09 07:53:34 PM [Insteon_Device] command:11; type:cleanup; group: 01 01/07/09 07:53:34 PM [Insteon_Device] found: on 01/07/09 07:53:34 PM [Insteon_PLM] Processing message for $insteon_laundry_motion_sensor Version: mh 2.105 R1588 |