From: Noah S. <ns...@ho...> - 2007-12-11 16:51:59
|
Were you ever able to get this to work? I'm still having the same problem nothing ever comes back. 12/11/07 11:07:33 AM: >>> Sending to DSC panel SetDateTime (010) with argument (1107121107) [010110712110786] 12/11/07 10:59:56 AM: >>> Sending to DSC panel TimeBroadcastControl (056) with argument (1) [0561CC] 12/11/07 10:59:55 AM: >>> Sending to DSC panel VerboseArmingControl (050) with argument (1) [0501C6] 12/11/07 10:59:55 AM: >>> Sending to DSC panel StatusReport (001) with argument () [00191] > Ok, I am actively troubleshooting this problem, but I thought I would post > to > see if anyone can give any pointers in the meantime. > > I finally bit the bullet and upgraded my system from its semi-frozen post > 102 > SVN state to the latest SVN snapshot. I have two main issues, but the > first > seems to have resolved itself (MH was not seeing my W800 signals, but that > seems to be working now). > > The BIG problem I am having is with my DSC5401. It just will not talk to > Misterhouse after the upgrade (well, it did work one time, but that was > it). > Starting up I see the following (edited superfluous lines): > > Loading other modules > Starting setup > - creating DSC5401 port on /dev/ttyS3 > - creating W800 port on /dev/ttyS2 > - creating Lynx10PLC port on /dev/ttyS0 > Debug level: /dev/ttyS0 = 0 at /pub/misterhouse/bin/../lib/Lynx10PLC.pm > line > 291 > > Done with setup > > 02/27/07 09:57:29 AM Calling Serial_match_add_hook > 02/27/07 09:57:29 AM Starting DSC 5401 computer interface module > 02/27/07 09:57:29 AM Sending to DSC panel Poll (000) with argument () > 02/27/07 09:57:29 AM Sending to DSC panel StatusReport (001) with argument > () > 02/27/07 09:57:29 AM Sending to DSC panel VerboseArmingControl (050) with > argument (1) > 02/27/07 09:57:29 AM Sending to DSC panel TimeBroadcastControl (056) with > argument (1) > Good code saved > 02/27/07 09:57:32 AM Command Error : Unknown > 02/27/07 09:57:32 AM System Error : RS-232 Receive Buffer Overrun > 02/27/07 09:57:32 AM Setting time on DSC panel to 0957022707 > 02/27/07 09:57:32 AM Sending to DSC panel SetDateTime (010) with argument > (0957022707) > ----- > > After this I would normally see the a zone status updated message from the > DSC > logging, plus I never get any updates from the system about zones opening > and > closing, nor do I get arm/disarm events. > > I am concerned with the "Command Error" and "System Errors" that are > occurring > during the startup (they come from the DSC5401 library code). I have not > seen those before upgrading. > > I do not remember making any kernel changes or serial port configuration > changes in the past few months. > > As a final bit, here's my DSC5401.2007_02.log file from startup: > Tue 02/27/07 10:03:17 ========= DSC5401.pm Initialized ========= > Tue 02/27/07 10:03:18 >>> Sending to DSC panel Poll (000) with argument () > [00090] > Tue 02/27/07 10:03:18 >>> Sending to DSC panel StatusReport (001) with > argument () [00191] > Tue 02/27/07 10:03:19 >>> Sending to DSC panel VerboseArmingControl (050) > with > argument (1) [0501C6] > Tue 02/27/07 10:03:19 >>> Sending to DSC panel TimeBroadcastControl (056) > with > argument (1) [0561CC] > Tue 02/27/07 10:03:19 501 Command Error Unknown > Tue 02/27/07 10:03:19 500 Command Acknowledge StatusReport > Tue 02/27/07 10:03:19 502 System Error RS-232 Receive Buffer Overrun > Tue 02/27/07 10:03:19 610 Zone Restored zone Front Door (001) > Tue 02/27/07 10:03:19 610 Zone Restored zone Media Room Windows (002) > Tue 02/27/07 10:03:19 610 Zone Restored zone Family Room Windows (003) > Tue 02/27/07 10:03:19 610 Zone Restored zone Garage Entry Door (004) > Tue 02/27/07 10:03:19 610 Zone Restored zone Kitchen Door or Windows > (005) > Tue 02/27/07 10:03:19 610 Zone Restored zone Music Room Windows (006) > Tue 02/27/07 10:03:19 610 Zone Restored zone Basement Door or Windows > (007) > Tue 02/27/07 10:03:19 610 Zone Restored zone Fire Alarm (008) > Tue 02/27/07 10:03:19 610 Zone Restored zone 009 (009) > Tue 02/27/07 10:03:19 610 Zone Restored zone 010 (010) > Tue 02/27/07 10:03:19 610 Zone Restored zone 011 (011) > Tue 02/27/07 10:03:19 610 Zone Restored zone 012 (012) > Tue 02/27/07 10:03:19 610 Zone Restored zone 013 (013) > Tue 02/27/07 10:03:19 610 Zone Restored zone 014 (014) > Tue 02/27/07 10:03:19 610 Zone Restored zone 015 (015) > Tue 02/27/07 10:03:19 610 Zone Restored zone 016 (016) > Tue 02/27/07 10:03:19 610 Zone Restored zone 017 (017) > Tue 02/27/07 10:03:19 610 Zone Restored zone 018 (018) > Tue 02/27/07 10:03:19 610 Zone Restored zone 019 (019) > Tue 02/27/07 10:03:19 610 Zone Restored zone 020 (020) > Tue 02/27/07 10:03:19 610 Zone Restored zone 021 (021) > Tue 02/27/07 10:03:19 610 Zone Restored zone 022 (022) > Tue 02/27/07 10:03:20 Setting time on DSC panel to 1003022707 > Tue 02/27/07 10:03:20 >>> Sending to DSC panel > SetDateTime (010) with argument (1003022707) [010100302270787] > > Troy > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys-and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > > |