From: Dean J. <dea...@ms...> - 2007-12-10 17:05:03
|
I don't see the X10 translation - only the serial data. Here's a snip from= log: 12/10/07 11:00:00 AM [Insteon_PLM] Command stack size: 9 12/10/07 11:00:00 AM [Insteon_PLM] Attempt to queue command already in queu= e; skipping ... 12/10/07 11:00:00 AM [Insteon_PLM] Parsing serial data: 02639a0006 12/10/07 11:00:00 AM [Insteon_PLM] Parsing serial data: 0263938006 12/10/07 11:00:01 AM [Insteon_PLM] Parsing serial data: 0263920006 12/10/07 11:00:01 AM [Insteon_PLM] Parsing serial data: 0263990006 12/10/07 11:00:01 AM [Insteon_PLM] num commands in 1 second exceeded thresh= old. Now delaying additional transmission for 1 second 12/10/07 11:00:02 AM [Insteon_PLM] Parsing serial data: 0263900006 12/10/07 11:00:03 AM [Insteon_PLM] Parsing serial data: 0263910006 12/10/07 11:00:03 AM [Insteon_PLM] Parsing serial data: 02634e0006 12/10/07 11:00:04 AM [Insteon_PLM] Parsing serial data: 0263438006 12/10/07 11:00:05 AM [Insteon_PLM] Parsing serial data: 0263950006 12/10/07 11:00:05 AM [Insteon_PLM] Parsing serial data: 02639d0006 The Serial Data I am guessing are my X10 commands, but MH isn't translating= them. ---------------------------------------- > Date: Mon, 10 Dec 2007 11:01:11 -0500 > From: gr...@li... > To: mis...@li... > Subject: Re: [mh] Using the Insteon PLM >=20 > Quoting Dean Junk (12/10/07 10:40 AM): >> Are there any setup commands that need to be run to allow it to receive >> X10 commands?=20 >=20 > If "it" =3D=3D the PLM, then no. The PLM will report anything that it is > able to receive and decode. I plugged in an old x10 controller and > pressed the on button and then the off button for B8 (which I picked at > random and is not a legit device for me). Here is the result: >=20 > 12/10/07 10:53:56 AM [Insteon_PLM] Parsing serial data: 0252ed00 > 12/10/07 10:53:56 AM X10: Unmatched incoming data=3DXB8 > 12/10/07 10:53:56 AM [Insteon_PLM] Parsing serial data: 0252e280 > 12/10/07 10:53:56 AM X10: Unmatched incoming data_chunk=3DXB8BJ (B 8) > 12/10/07 10:53:56 AM X10: Unmatched incoming data_chunk=3DXBJ (B ON) > 12/10/07 10:53:56 AM X10: Unmatched incoming data=3DXBJ > 12/10/07 10:53:57 AM [Insteon_PLM] Parsing serial data: 0252ed00 > 12/10/07 10:53:57 AM X10: Unmatched incoming data_chunk=3DXB8BJB8 (B 8) > 12/10/07 10:53:57 AM X10: Unmatched incoming data_chunk=3DXBJB8 (B ON) > 12/10/07 10:53:57 AM X10: Unmatched incoming data_chunk=3DXB8 (B 8) > 12/10/07 10:53:57 AM X10: Unmatched incoming data=3DXB8 > 12/10/07 10:53:57 AM [Insteon_PLM] Parsing serial data: 0252e380 > 12/10/07 10:53:57 AM X10: Unmatched incoming data_chunk=3DXB8BJB8BK (B 8) > 12/10/07 10:53:57 AM X10: Unmatched incoming data_chunk=3DXBJB8BK (B ON) > 12/10/07 10:53:57 AM X10: Unmatched incoming data_chunk=3DXB8BK (B 8) > 12/10/07 10:53:57 AM X10: Unmatched incoming data_chunk=3DXBK (B OFF) > 12/10/07 10:53:57 AM X10: Unmatched incoming data=3DXBK >=20 >=20 >=20 >=20 > ------------------------------------------------------------------------- > SF.Net email is sponsored by:=20 > Check out the new SourceForge.net Marketplace. > It's the best place to buy or sell services for > just about anything Open Source. > http://sourceforge.net/services/buy/index.php > ________________________________________________________ > To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_= id=3D1365 >=20 |