From: Gregg L. <gr...@li...> - 2007-10-30 22:32:16
|
Hi Gary, Quoting Garry Doucette (10/30/07 5:15 PM): > I'm not sure there's any way to shut it down. I did some experimentation > though. If I use the commands > > rs232 -d /dev/ttyS2 -b 19200 2 -s "\h02 62 05 CA FE 0F 11 FF" --hex > --verbose -r9 --wait .4 > rs232 -d /dev/ttyS2 -b 19200 2 -s "\h02 62 05 CA FE 0F 13\n" --hex --verbose > -r9 --wait .4 > > my desk lamp goes on and off perfectly. >From your previous recent log, I'm not seeing fragments nor suspecting the problem to be non-mh related. >> Separately, can you try commenting out the deck lights declaration in > items.mht and bang away on just your desk light? Does this work w/o problem > for an extended period of time? If you do the reverse (uncomment deck > lights and comment out desk lamp) do you no useful operation? > > Tried the above no lights. > >> Is the deck light's lamplinc on the same phase as your PLM? > > Yes. They're about 6 feet apart on the same circuit. > > I'm not sure where to look next... Given an analysis of your log, I'm suspecting a condition that apparently never happens at my house. So, I've made some minor mods to Insteon_Device and Insteon_PLM that I just committed. I hate to sound like a broken record, but could you update and retest--posting your log if problems persist? Thanks for your patience. Gregg |