From: DanStern <Dan...@ao...> - 2006-12-06 05:29:44
|
Jim, Thanks for the effort. Others will benefit as well. We can't be the only ones using X_10 Relay. My perl skills leave something to be desired. Any chance you could send me a snippet of the fix, (or perhaps post it?) until it makes its way on to sourceforge. Dan Jim Serack wrote: > > An update - > > I put the code to convert "$data" into uppercase in the X10_Interface.pm > file. > > It works the relayed signals now - I haven't seen any problems with other > regular signals. > > Where should I send the updated code? > > Jim > > > -----Original Message----- > From: mis...@li... > [mailto:mis...@li...] On Behalf Of Jim > Serack > Sent: December 3, 2006 9:53 PM > To: 'The main list for the MisterHouse home automation program' > Subject: [mh] HELP! - Serial_Item.pm bug - Was Help with x10_rf_relay & > "X10string not parsed" messagein2.103 > > > Dear Serial_Item.pm re-write author (Matt?), > > X10_rf_relay seems to have trouble getting the X10 message sent out of mh > to > the powerline interface because it is in lower case e.g. > Incoming from the W800 it seems ok: > > Serial Date: event_type = X, event data = XC4CJ <- note upper case > X10_Interface Error, X10 string not parsed: xc4cj <- note lower case > > This worked in 2.100 because (I think) there was an conversion to > uppercase > in "sub set" within Serial_Item.pm unless casesensitive was set > (x10_rf_relay.pl sets it to 0). > > However in 2.103 - Serial_Item.pm does not have an uppercase conversion > statement - or a "sub set" for that matter. So where did it go? > > I can't say I really understand what drives the serial interface to the > cm11 > now - but conversion back to uppercase before the X10_Interface.pm modules > seems to be missing ... > > Any advice on where it should go? > > Jim > -----Original Message----- > From: mis...@li... > [mailto:mis...@li...] On Behalf Of Jim > Serack > Sent: December 1, 2006 9:39 AM > To: 'The main list for the MisterHouse home automation program' > Subject: Re: [mh] Help with x10_rf_relay & "X10 string not parsed" > messagein2.103 > > > Dan, > > I haven't looked into it as far as you have - but yes there appears to be > problems with my system in terms of relaying certain codes since I > upgraded. > > Jim > > -----Original Message----- > From: mis...@li... > [mailto:mis...@li...] On Behalf Of > DanStern > Sent: November 26, 2006 8:08 PM > To: mis...@li... > Subject: [mh] Help with x10_rf_relay & "X10 string not parsed" message > in2.103 > > > > Hi, My x10_rf_relay stopped working with the 2.103 version. If there is a > solution to this in the WIKI or the MH Forum I can't find it. Any help > would > be appreciated. > > I was running compiled MH version 2.100 on a 400mhz Windows 2000 SP4 box. > It > has been a while since I had the time to update, and most of the > functtions > I use worked. The rf relay works fine for me in the 2.100 version. > > In version 2.103 I get a confirmation in the log "Relaying X10 RF data: > xm6mj" just like version 2.100. Unfortunately, the rf command is not > relayed > and I get "X10_Interface error, X10 string not parsed: xm6mj." Triggers > work > fine as do "on" and "off" commands issued through the web interface so my > CM11 is working. > > Here are some key mh.private.ini entries: > cm11_port=COM3 > W800_module=X10_W800 > W800_port=COM2 > x10_relay_hc=[fmc] > > and the related mht entry: > X10I, M6, Family_Room_Lamp, All_Lights|Family_Room, > CM11 > (tried with and without CM11 in "other") > > I think this may have something to do with the new Device_Item branches, > but > I haven't been able to find it or figure it out. Thanks again for any > advice. > > DanStern > Stillwater, MN > > -- > View this message in context: > http://www.nabble.com/Help-with-x10_rf_relay---%22X10-string-not-parsed%22-m > essage-in-2.103-tf2709242.html#a7553419 > Sent from the Misterhouse - User mailing list archive at Nabble.com. > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > > > ------------------------------------------------------------------------- > Take Surveys. Earn Cash. Influence the Future of IT > Join SourceForge.net's Techsay panel and you'll get the chance to share > your > opinions on IT & business topics through brief surveys - and earn cash > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV > ________________________________________________________ > To unsubscribe from this list, go to: > http://sourceforge.net/mail/?group_id=1365 > > > -- View this message in context: http://www.nabble.com/Help-with-x10_rf_relay---%22X10-string-not-parsed%22-message-in-2.103-tf2709242.html#a7713830 Sent from the Misterhouse - User mailing list archive at Nabble.com. |