[mh] Re: Project Omnistat (2 stats)

[Chuck <pip...@ya...>]

Oops, guess I should have explained that.  I have code that gets the group1 data each minute.  When it comes back I print a message to the log.  The message gives me a quick check to confirm the code is working.  
 
 I spent some more time on the code this morning.  I now have the web interface working for both stats.  I see the current information for each, as well as changing the temps, turning the fan on and off, etc.  
 
 Chuck
----- Original Message ----
From: Joel Davidson <jr...@io...>
To: Chuck <pip...@ya...>
Cc: mis...@li...
Sent: Sunday, January 08, 2006 18:59:28
Subject: Re: Project Omnistat (2 stats)

Hmm, is that coming from some of the debug print statements?  I've never
seen anything like that, but then I thought I had all the debug
statements commented out.

Glad to see the addressing stuff is working ok.

Joel

On Fri, 6 Jan 2006, it would appear that Chuck wrote:

> Joel,
>
> I was playing around today and suddenly found these messages in my log.  Any idea what they mean?
>
> 01/06/06 11:21:00 PM Downstairs temp is 65, system mode is auto  01/06/06 11:21:00 PM Upstairs temp is 65, system mode is heat
> Yup, that's right, I finally got the second stat connected and the code is working!  I'll add the second stat to the web panel and send you a screen clip sometime this weekend.
>
> For those who may not be following this project, I'm working on a web interface for the Omnistat code.  I have a working web interface that can handle the basic controls (heat/cool temps, fan, heat/cool mode) for one stat and now that I've got MisterHouse talking to the second I'll add that.
>
> Chuck