From: James A. <ja...@th...> - 2004-03-18 20:52:52
|
I found the problem. I hadn't updated the firmware in some time so it was still using the old baudrate (125000). The kernal mod was using the new one. Now if I could learn the codes using MH it would be great. - James David Norwood wrote: >Hmm, what kernel are you running? > >David > >----- Original Message ----- >From: "James Armstrong" <ja...@th...> >To: <mis...@li...> >Sent: Wednesday, March 17, 2004 10:38 AM >Subject: [misterhouse-users] USB_UIRT help > > > > >>I am trying to get the USB_UIRT.pm working on Mh so I can use it with >>mythtv. I had no luck / help getting the USB_UIRT device working with >>lirc like some people have mentioned. I cannot seem to get mh to >>recognize it. I don't know if I have the version that uses the higher >>speed port settings or not. This is what I get from the logs: >> >> From Linux: >> >>hub.c: new USB device 00:07.2-1, assigned address 2 >>usb.c: USB device 2 (vend/prod 0x403/0xf850) is not claimed by any >>active driver >>. >>usb.c: registered new driver serial >>usbserial.c: USB Serial support registered for Generic >>usbserial.c: USB Serial Driver core v1.4 >>usbserial.c: USB Serial support registered for FTDI SIO >>usbserial.c: USB Serial support registered for FTDI 8U232AM Compatible >>usbserial.c: USB Serial support registered for FTDI FT232BM Compatible >>usbserial.c: USB Serial support registered for USB-UIRT Infrared >>Receiver/Transm >>itter >>usbserial.c: USB-UIRT Infrared Receiver/Transmitter converter detected >>usbserial.c: USB-UIRT Infrared Receiver/Transmitter converter now >>attached to tt >>yUSB0 (or usb/tts/0 for devfs) >>usbserial.c: USB Serial support registered for Home-Electronics TIRA-1 >>IR Transc >>eiver >>ftdi_sio.c: v1.3.4:USB FTDI Serial Converters Driver >> >> From Misterhouse: >> >> - creating USB_UIRT object on port /dev/ttyUSB0 >> >>Getting UIRT Info... >>USB_UIRT sending 23dd >>USB_UIRT expected 8 byte response, only got 0 >>USB_UIRT Protocol Version 0.0 >>USB_UIRT Firmware Version 0.0 Date 00/00/2000 >> >>Getting UIRT Config Info... >>USB_UIRT sending 3801c7 >>USB_UIRT expected 3 byte response, only got 1 >>** USB-UIRT Config: currently = 00000000 (LED_RX=0, LED_TX=0, LEGACY_RX=0) >> >> >>------------------------------------------------------- >>This SF.Net email is sponsored by: IBM Linux Tutorials >>Free Linux tutorial presented by Daniel Robbins, President and CEO of >>GenToo technologies. Learn everything from fundamentals to system >>administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click >>________________________________________________________ >>To unsubscribe from this list, go to: >> >> >http://sourceforge.net/mail/?group_id=1365 > > > > > >------------------------------------------------------- >This SF.Net email is sponsored by: IBM Linux Tutorials >Free Linux tutorial presented by Daniel Robbins, President and CEO of >GenToo technologies. Learn everything from fundamentals to system >administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click >________________________________________________________ >To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365 > > |