From: Neil C. <nc...@co...> - 2003-07-10 17:45:48
|
I now have the DS9097U-009 and I can list the attached temperature probes but nothing else (DS2407 & DS2407P) one at a time (argh). Now I can get the numbers from the listing but when I try to use them in the mht file I end up with problems. What is the format of the ibutton addresses? Ex: Device type:22 ID:000000056d99 CRC:ce: DS1822 MHT file?: #Device type:10 ID:000000070387 CRC:5c: DS1920 # DS1820 on Dev board IBUTTON, 10000000070387, ib_tmp1, # Has green & black wires DS1822 ? #IBUTTON, 2290fe06000000, ib_tmp2, IBUTTON, 2200000060fe90, ib_tmp2, # bare 1822 #Device type:22 ID:000000056d99 CRC:ce: DS1822 #IBUTTON, 22996d05000000, ib_tmp3, IBUTTON, 22000000056d99, ib_tmp3, When I request the ibutton be read I get back: Temp for sensor Hardware::iButton::Device::DS1920=HASH(0x96ff7f8) 1: F -- Linux Home Automation Neil Cherry nc...@co... http://mywebpages.comcast.net/ncherry/ (Text only) http://linuxha.sourceforge.net/ (SourceForge) http://hcs.sourceforge.net/ (HCS II) |