From: <fre...@ne...> - 2002-07-10 11:40:27
|
This link, found towards the bottom of the Misterhouse FAQ, should help in figuring out how your switches are wired. http://www.hometoys.com/htinews/dec97/articles/kingery/kingery6.htm Fredrik "Jeff Burricelli" <je...@bu...> wrote: >A few weeks ago I posted asking about how I can control 2 lights I have that are on the same circuit and both controlled by the same 3 switches. Some suggested the X10 3-way switch and getting a 2nd slave switch for the 3rd switch I have. That is what I did, but when I went to install them today, the current Master switch I have has 4 power wires connected (5 including the ground). The X10 Master only has 3 wires. Any ideas if I can use this or not, and how I would hook it up? I did look on X10's site, and they do say that the 3-way switches are for a light that is controlled by 2 or more switches. That leads me to believe this is possible. I do have 2 lights in this setup, but Im not sure if that would make any difference or not. > >Thanks, >Jeff Burricelli > __________________________________________________________________ Your favorite stores, helpful shopping tools and great gift ideas. Experience the convenience of buying online with Shop@Netscape! http://shopnow.netscape.com/ Get your own FREE, personal Netscape Mail account today at http://webmail.netscape.com/ |