Re: [misterhouse-users] Bad checksum (redux?)

[Gaetan l. L. <ga...@sg...>]

Here's my thought about that 

Are the file permissions on the device are the same.

What does "fuser /dev/ttyS0" report

Maybe pluging an external modem, and try to see if you could get to the prompt
"AT" with "cu", "minicom" or whatever communication program.

Have you try to reinstall misterhouse, in case there was something wrong
during the install

On Tue, Feb 12, 2002 at 07:47:31PM -0600, Holly J. Sommer wrote:
> I've had my mail suspended for a couple months, but have nosed around in
> the archives at sourceforge. Haven't yet seen anything definitive about
> this, so here goes.
> 
> I have two linux boxes, both have mh2.64 on them. Box #1 responds
> correctly tothe test_x10 script in mh/bin. Using the same exact test_x10
> file on Box #2, I get the bad checksum error messages. The serial
> "card" is installed -- ie:, physically pressed into the COM1 port on the
> mobo of Box #2. Obviously the CM11 works :)
> 
> setserial -a /dev/ttyS0 returns the same info for both machines, so I'm at
> a loss here. Anyone have suggestions? I'm not really familiar with
> debugging hardware issues under Linux, so if there are tools I can use to
> test ttyS0, I gladly welcome suggestions.
> 
> Thanks.
> 
> -Holly
> 
> 
> 
> ________________________________________________________
> To unsubscribe from this list, go to: http://sourceforge.net/mail/?group_id=1365

-- 
--
----------------------------------------------------------------------
  Gaetan Lord - FTA - ga...@sg... - SGI - Montreal, Canada
  pager:  gae...@mo...  (200 car. max)
  "There is no future in time traveling"
---------------------------------------------------------------------- 

  1:30am  up 5 days, 12:34, 13 users,  load average: 0.04, 0.01, 0.00