Re: [Mdtoceditor-forum] mdtoceditor & Sony MDS-JE640

[Michael H. <m.h...@ne...>]

OK, I set the standard delay-values in the tcl-file and changed the delay in the configure-menu. At the value 50 I got no errors. But this is very slow, so I changed the delay in line 152 to 4 and in the configure-menu to 15 and all works safe.
Next week I'll loading down mdtoceditor and compile it at a faster machine with a faster internet-connection. You'll hear the results.

cu Micha

Am Sat, 16 Feb 2002 18:24:39 +0100
Uwe Rathmann <Uwe...@ep...> schrieb:

> On Saturday 16 February 2002 17:46, Michael Heinzel wrote:
> 
> > I set the timing to 10 and the delay to 20, except the problem with the "k"
> > it works fine. Please help me, what is the meaning of timing? When I
> > increase it, the problems get worse.
> 
> Timing is the delay (in ms) that is inserted automatically when no explicite 
> "delay" command is added. If you loose characters this is the value you have 
> to increase. Maybe try the other way round: Start with something like 1000 
> and decrease it until you loose commands.
> 
> delay is a factor where the number behind the "delay" command is 
> multiplicated with. (If it is no explicte time like 4s or 4ms).
> 
> Increasing these numbers will slow down transmission but the effect of the 
> timing value is more important one.
> 
> Uwe