dmesg

Linux version 2.6.10_dev-VT8610 (martinc@joank) (gcc version 3.4.3    (MontaVista 3.4.3-25.0.30.0501131 2005-07-23)) #295 Wed Oct 13 11:48:35 CST 2010
CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ)
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Machine: VIA-VT8610
Memory policy: ECC disabled, Data cache writeback
On node 0 totalpages: 28672
  DMA zone: 28672 pages, LIFO batch:7
  Normal zone: 0 pages, LIFO batch:1
  HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: mem=112M root=/dev/mtdblock0 noinitrd ro rootfstype=cramfs console=ttyS0,115200n8 lpj=750000 lcdid=0 lcdbpp=24 lcdon=1 quiet
PID hash table entries: 512 (order: 9, 8192 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 112MB = 112MB total
Memory: 110592KB available (2253K code, 514K data, 176K init)
Calibrating delay loop (skipped)... 150.00 BogoMIPS preset
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
spawn_desched_task(00000000)
desched cpu_callback 3/00000000
ksoftirqd started up.
desched cpu_callback 2/00000000
desched thread 0 started up.
NET: Registered protocol family 16
via_pci_init
PCI: VIA PCI Bridge
Neil : init done
PCI: bus0: Fast back to back transfers disabled
SCSI subsystem initialized
usbcore: registered new driver hub
NetWinder Floating Point Emulator V0.97 (double precision)
NTFS driver 2.1.22 [Flags: R/O].
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
i2c /dev entries driver
i2c-core: driver dev_driver registered.
i2c: adding vt8430_i2c_adapter.
i2c_adapter i2c-0: Registered as minor 0
i2c_adapter i2c-0: registered as adapter #0
i2c: successfully added bus
[vt8500_i2c_api_i2c_init]
i2c-core: driver VT8430_I2C_API registered.
i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 24
i2c_adapter i2c-0: master_xfer: with 1 msgs.
i2c_err : write NACK error (tx) 
i2c_err : write NACK error (tx) 
i2c_err : write NACK error (tx) 
i2c_err : write NACK error (tx) 
<6>[vt8430_i2c_api_init] vt8430_i2c_api_init.
i2c: vt8610 algorithm module loaded.
spi_probe: /dev/VT8500_SPI major number 153, minor number 0, device number 3
viafb: framebuffer at 0x7c00000, mapped to 0xc7880000, using 4194304k, total 4194304k
*W* Request FB count 20 is too many!
Console: switching to colour frame buffer device 40x30
fb0: VT8430 VGA frame buffer device
vt8430fb_probe out
<6>vt8610 Real Time Clock driver v0.53 initialized: ok
Watchdog: timer margin 60 sec
vt8500 Watchdog driver v0.70 initialized: ok
i8042_controller_init
i8042_command cmd=0x1aa
I8042_CMD_CTL_TEST ok 0x55
i8042_command cmd=0x120
write 0x50 cmd 0x1060
i8042_command cmd=0x1060
i8042_command cmd=0x11d3
i8042_command cmd=0xa7
i8042_command cmd=0x120
i8042_command cmd=0xa8
i8042_command cmd=0x120
i8042_command cmd=0x1060
i8042_command cmd=0x11d3
i8042_command cmd=0x11d3
i8042_command cmd=0x11d3
i8042_command cmd=0x1060
serio: i8042 AUX port at 0xd8008800,0xd8008804 irq 45
i8042_command cmd=0x1060
serio: i8042 KBD port at 0xd8008800,0xd8008804 irq 46
ttyS0 at MMIO 0xd8200000 (irq = 32) is a VT8610
ttyS1 at MMIO 0xd82b0000 (irq = 33) is a VT8610
ttyS2 at MMIO 0xd8210000 (irq = 47) is a VT8610
ttyS3 at MMIO 0xd82c0000 (irq = 50) is a VT8610
VT8610 Serial driver v0.74 initialized: ok
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 40960K size 1024 blocksize
loop: loaded (max 8 devices)
VIA Rhine Family Fast Ethernet Adapter Driver Ver. 5.08
Copyright (c) 2002 VIA Technologies, Inc.
eth0: VIA Rhine III Fast Ethernet Adapter
eth0: MAC=<skip> IO=0xd8004000 Mem=0xd8004000  IRQ=10 
Linux video capture interface: v1.00
elevator: using anticipatory as default io scheduler
VT8500 SPI Flash Driver, (c) 2007 VIA Electronics ltd.
vt8500 sf controller initial ok
cmdlinepart partition parsing not available
Creating 12 MTD partitions on "mtdsf device":
0x00800000-0x01450000 : "filesystem"
0x00000000-0x00280000 : "mini_filesystem"
0x00280000-0x00400000 : "mini_kernel"
0x00400000-0x00800000 : "font_lib"
0x01450000-0x014a0000 : "sysconf"
0x014a0000-0x01610000 : "kernel"
0x01610000-0x01790000 : "wifi"
0x01790000-0x017a0000 : "ECD_key"
0x017a0000-0x017d0000 : "uboot"
0x017d0000-0x017e0000 : "uboot var1"
0x017e0000-0x017f0000 : "uboot var2"
0x017f0000-0x01800000 : "vload"
PCI: enabling device 0000:00:04.0 (0040 -> 0042)
ehci_hcd 0000:00:04.0: EHCI Host Controller
ehci_hcd 0000:00:04.0: illegal capability!
ehci_hcd 0000:00:04.0: irq 43, pci mem 0xd8007900
ehci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:04.0: USB 0.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
mice: PS/2 mouse device common for all mice
i8042_command cmd=0x1060
i8042_command cmd=0x10d4
atkbd.c: keyboard reset failed on isa0060/serio1
i8042_command cmd=0x10d4
i8042_command cmd=0x10d4
i8042_command cmd=0x1060
i8042_command cmd=0x1060
atkbd.c: keyboard reset failed on isa0060/serio0
i8042_command cmd=0x1060
GPIO_INT_REQ_TYPE_VAL = 18
register input dev:1
WMT gpio input irq driver initialized: ok
GPIO_INT_REQ_TYPE_VAL = d8
register input dev:3
WMT gpio input irq driver initialized: ok
GPIO_INT_REQ_TYPE_VAL = 8d8
register input dev:5
WMT gpio input irq driver initialized: ok

Enter vt8500_ts_init
VT8500-TS successfully loaded

exit vt8500_ts_init
Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
ALSA device list:
  No soundcards found.
NET: Registered protocol family 2

prepare to timeout

Pen UP

timeout 1

close os timer 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Initializing XFRM netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
PMC: VT8610 Power Management driver
PMC: Power button is configured as soft power
usb 1-1: new high speed USB device using ehci_hcd and address 2
VFS: Mounted root (cramfs filesystem) readonly.
Freeing init memory: 176K
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
usb 1-1.1: new high speed USB device using ehci_hcd and address 3
usb 1-1.2: new high speed USB device using ehci_hcd and address 4
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
 rx_thresh : 18 ([S&F]=0x38, 64DW=0x18)
eth0: failed to detect cable link
  Vendor: Generic   Model: Flash Disk        Rev: 8.07
  Type:   Direct-Access                      ANSI SCSI revision: 02
 sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete
vntwusb: falsely claims to have parameter b80211hEnable
/home/VT6656_Linux_src_WCN-NET_V2.1.1T8500/driver/main_usb.c: VIA Networking     Wireless LAN USB Driver 1.20.03
VIA Networking Wireless LAN USB Driver Ver. 1.20.03
Copyright (c) 2004 VIA Networking Technologies, Inc.
usbcore: registered new driver vntwusb
eth0: Link auto-negotiation speed 100M bps full duplex
Config_FileOperation file Not exist
Zone=[2][E][U]!!
Antenna AUX&MAIN all available!
Antenna AUX&MAIN all available!
vt1602_init: ***** Entered *****
index = 0x0 , value = 0x5a 
index = 0xa , value = 0x40 
vt1602_init: ***** Leave *****
vt1602_set_headphone_volume: **********MDC**********
vt1602_set_record_mode: ************MDC***********
vt1602_set_line_volume: **********MDC**********
vt1602_set_sample_rate: ************MDC***********