WikiPage dmesg modified by Alex Samorukov

Alex Samorukov — Tue, 05 Jun 2012 10:54:45 -0000

Linux version 2.6.10_dev-VT8610 (martinc@joank) (gcc version 3.4.3 (MontaVista 3.4.3-25.0.30.0501131 2005-07-23)) #295 Wed Oct 13 11:48:35 CST 2010 CPU: ARM926EJ-Sid(wb) [41069265] revision 5 (ARMv5TEJ) CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets Machine: VIA-VT8610 Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 28672 DMA zone: 28672 pages, LIFO batch:7 Normal zone: 0 pages, LIFO batch:1 HighMem zone: 0 pages, LIFO batch:1 Built 1 zonelists Kernel command line: mem=112M root=/dev/mtdblock0 noinitrd ro rootfstype=cramfs console=ttyS0,115200n8 lpj=750000 lcdid=0 lcdbpp=24 lcdon=1 quiet PID hash table entries: 512 (order: 9, 8192 bytes) Console: colour dummy device 80x30 Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 112MB = 112MB total Memory: 110592KB available (2253K code, 514K data, 176K init) Calibrating delay loop (skipped)... 150.00 BogoMIPS preset Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: Testing write buffer coherency: ok spawn_desched_task(00000000) desched cpu_callback 3/00000000 ksoftirqd started up. desched cpu_callback 2/00000000 desched thread 0 started up. NET: Registered protocol family 16 via_pci_init PCI: VIA PCI Bridge Neil : init done PCI: bus0: Fast back to back transfers disabled SCSI subsystem initialized usbcore: registered new driver hub NetWinder Floating Point Emulator V0.97 (double precision) NTFS driver 2.1.22 [Flags: R/O]. JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc. i2c /dev entries driver i2c-core: driver dev_driver registered. i2c: adding vt8430_i2c_adapter. i2c_adapter i2c-0: Registered as minor 0 i2c_adapter i2c-0: registered as adapter #0 i2c: successfully added bus [vt8500_i2c_api_i2c_init] i2c-core: driver VT8430_I2C_API registered. i2c_adapter i2c-0: found normal i2c entry for adapter 0, addr 24 i2c_adapter i2c-0: master_xfer: with 1 msgs. i2c_err : write NACK error (tx) i2c_err : write NACK error (tx) i2c_err : write NACK error (tx) i2c_err : write NACK error (tx) <6>[vt8430_i2c_api_init] vt8430_i2c_api_init. i2c: vt8610 algorithm module loaded. spi_probe: /dev/VT8500_SPI major number 153, minor number 0, device number 3 viafb: framebuffer at 0x7c00000, mapped to 0xc7880000, using 4194304k, total 4194304k *W* Request FB count 20 is too many! Console: switching to colour frame buffer device 40x30 fb0: VT8430 VGA frame buffer device vt8430fb_probe out <6>vt8610 Real Time Clock driver v0.53 initialized: ok Watchdog: timer margin 60 sec vt8500 Watchdog driver v0.70 initialized: ok i8042_controller_init i8042_command cmd=0x1aa I8042_CMD_CTL_TEST ok 0x55 i8042_command cmd=0x120 write 0x50 cmd 0x1060 i8042_command cmd=0x1060 i8042_command cmd=0x11d3 i8042_command cmd=0xa7 i8042_command cmd=0x120 i8042_command cmd=0xa8 i8042_command cmd=0x120 i8042_command cmd=0x1060 i8042_command cmd=0x11d3 i8042_command cmd=0x11d3 i8042_command cmd=0x11d3 i8042_command cmd=0x1060 serio: i8042 AUX port at 0xd8008800,0xd8008804 irq 45 i8042_command cmd=0x1060 serio: i8042 KBD port at 0xd8008800,0xd8008804 irq 46 ttyS0 at MMIO 0xd8200000 (irq = 32) is a VT8610 ttyS1 at MMIO 0xd82b0000 (irq = 33) is a VT8610 ttyS2 at MMIO 0xd8210000 (irq = 47) is a VT8610 ttyS3 at MMIO 0xd82c0000 (irq = 50) is a VT8610 VT8610 Serial driver v0.74 initialized: ok io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 40960K size 1024 blocksize loop: loaded (max 8 devices) VIA Rhine Family Fast Ethernet Adapter Driver Ver. 5.08 Copyright (c) 2002 VIA Technologies, Inc. eth0: VIA Rhine III Fast Ethernet Adapter eth0: MAC= IO=0xd8004000 Mem=0xd8004000 IRQ=10 Linux video capture interface: v1.00 elevator: using anticipatory as default io scheduler VT8500 SPI Flash Driver, (c) 2007 VIA Electronics ltd. vt8500 sf controller initial ok cmdlinepart partition parsing not available Creating 12 MTD partitions on "mtdsf device": 0x00800000-0x01450000 : "filesystem" 0x00000000-0x00280000 : "mini_filesystem" 0x00280000-0x00400000 : "mini_kernel" 0x00400000-0x00800000 : "font_lib" 0x01450000-0x014a0000 : "sysconf" 0x014a0000-0x01610000 : "kernel" 0x01610000-0x01790000 : "wifi" 0x01790000-0x017a0000 : "ECD_key" 0x017a0000-0x017d0000 : "uboot" 0x017d0000-0x017e0000 : "uboot var1" 0x017e0000-0x017f0000 : "uboot var2" 0x017f0000-0x01800000 : "vload" PCI: enabling device 0000:00:04.0 (0040 -> 0042) ehci_hcd 0000:00:04.0: EHCI Host Controller ehci_hcd 0000:00:04.0: illegal capability! ehci_hcd 0000:00:04.0: irq 43, pci mem 0xd8007900 ehci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:04.0: USB 0.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. mice: PS/2 mouse device common for all mice i8042_command cmd=0x1060 i8042_command cmd=0x10d4 atkbd.c: keyboard reset failed on isa0060/serio1 i8042_command cmd=0x10d4 i8042_command cmd=0x10d4 i8042_command cmd=0x1060 i8042_command cmd=0x1060 atkbd.c: keyboard reset failed on isa0060/serio0 i8042_command cmd=0x1060 GPIO_INT_REQ_TYPE_VAL = 18 register input dev:1 WMT gpio input irq driver initialized: ok GPIO_INT_REQ_TYPE_VAL = d8 register input dev:3 WMT gpio input irq driver initialized: ok GPIO_INT_REQ_TYPE_VAL = 8d8 register input dev:5 WMT gpio input irq driver initialized: ok Enter vt8500_ts_init VT8500-TS successfully loaded exit vt8500_ts_init Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC). ALSA device list: No soundcards found. NET: Registered protocol family 2 prepare to timeout Pen UP timeout 1 close os timer 2 IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 8192 bind 16384) Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 15 PMC: VT8610 Power Management driver PMC: Power button is configured as soft power usb 1-1: new high speed USB device using ehci_hcd and address 2 VFS: Mounted root (cramfs filesystem) readonly. Freeing init memory: 176K hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected usb 1-1.1: new high speed USB device using ehci_hcd and address 3 usb 1-1.2: new high speed USB device using ehci_hcd and address 4 scsi0 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning rx_thresh : 18 ([S&F]=0x38, 64DW=0x18) eth0: failed to detect cable link Vendor: Generic Model: Flash Disk Rev: 8.07 Type: Direct-Access ANSI SCSI revision: 02 sda: sda1 Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0 usb-storage: device scan complete vntwusb: falsely claims to have parameter b80211hEnable /home/VT6656_Linux_src_WCN-NET_V2.1.1T8500/driver/main_usb.c: VIA Networking Wireless LAN USB Driver 1.20.03 VIA Networking Wireless LAN USB Driver Ver. 1.20.03 Copyright (c) 2004 VIA Networking Technologies, Inc. usbcore: registered new driver vntwusb eth0: Link auto-negotiation speed 100M bps full duplex Config_FileOperation file Not exist Zone=[2][E][U]!! Antenna AUX&MAIN all available! Antenna AUX&MAIN all available! vt1602_init: ***** Entered ***** index = 0x0 , value = 0x5a index = 0xa , value = 0x40 vt1602_init: ***** Leave ***** vt1602_set_headphone_volume: **********MDC********** vt1602_set_record_mode: ************MDC*********** vt1602_set_line_volume: **********MDC********** vt1602_set_sample_rate: ************MDC***********

Recent changes to dmesg

WikiPage dmesg modified by Alex Samorukov