matplotlib-users — Discussion related to using matplotlib

[Matplotlib-users] Difference in cross correlation in R & Matplotlib

[Sudheer J. <sud...@ya...>]

*************************************************************** Sudheer Joseph         Indian National Centre for Ocean Information Services Ministry of Earth Sciences, Govt. of India POST BOX NO: 21, IDA Jeedeemetla P.O. Via Pragathi Nagar,Kukatpally, Hyderabad; Pin:5000 55 Tel:+91-40-23886047(O),Fax:+91-40-23895011(O), Tel:+91-40-23044600(R),Tel:+91-40-9440832534(Mobile) E-mail:sjo...@gm...;sud...@ya... Web- http://oppamthadathil.tripod.com ***************************************************************

Re: [Matplotlib-users] How do I make a Mercator map larger

[Eric F. <ef...@ha...>]

On 2016/01/05 9:48 AM, Martin McGlensey wrote:
> Arnaldo,
>
> Thanks for the response. I figured it out. Figsize although the units
> are inches it does not correspond to inches on the display. I had to go
> up to 23 X 12 to get a large image on the display. If I want to fill the
> display what parameters should I use? I’m looking for a large map not a
> large frame size. Maybe I’m not understanding the functions of the
> various arguments used.

Rather than using a large size in inches, increase the value of the 
"dpi" kwarg to "figure()".  When it matches your actual screen dpi, the 
display on the screen should be correct in the specified dimensions in 
inches, *provided* those dimensions plus the margins (toolbar etc.) fit 
on your screen.  If they don't, then decrease the dpi (scaling the 
displayed figure down) until they do.

Eric

>
> Regards,
>
> Marty
>
> *From:*Arnaldo Russo [mailto:arn...@gm...]
> *Sent:* Monday, January 4, 2016 6:43 AM
> *To:* Martin McGlensey <mmc...@fr...>
> *Cc:* mat...@li...
> *Subject:* Re: [Matplotlib-users] How do I make a Mercator map larger
>
> Hi Martin,
>
> Have you tried to save your figure and check if it does not enlarge your
> figure?
>
>      plt.savefig("mercator.png")
>
> Cheers,
>
> Arnaldo.
>
> ---
>
> Arnaldo D'Amaral Pereira Granja Russo
>
> Universidade do Estado de Santa Catarina - UDESC
>
> Pesquisador - Instituto Ambiental Boto Flipper
>
> institutobotoflipper.org
>
> 2016-01-03 20:20 GMT-02:00 Martin McGlensey <mmc...@fr...
> <mailto:mmc...@fr...>>:
>
>     Hello,
>
>     I’m a new user to both python and basemap. I’ve got my map working
>     OK, but would like to make it larger on the display. I’ve tried the
>     height and width parameters in the map definition (m=basemap(…) and
>     plt.figure(figuresize=(x,y)). Neither appear to have any effect on
>     the size of the map.
>
>     Is there an easy way to convert map coordinates to inches?
>
>     Thanks,
>
>     Marty
>
>
>     ------------------------------------------------------------------------------
>
>     _______________________________________________
>     Matplotlib-users mailing list
>     Mat...@li...
>     <mailto:Mat...@li...>
>     https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>
>
> ------------------------------------------------------------------------------
>
>
>
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

Re: [Matplotlib-users] How do I make a Mercator map larger

[Martin M. <mmc...@fr...>]

Arnaldo,

 

Thanks for the response. I figured it out. Figsize although the units are inches it does not correspond to inches on the display. I had to go up to 23 X 12 to get a large image on the display. If I want to fill the display what parameters should I use? I’m looking for a large map not a large frame size. Maybe I’m not understanding the functions of the various arguments used.

 

Regards,

Marty

 

From: Arnaldo Russo [mailto:arn...@gm...] 
Sent: Monday, January 4, 2016 6:43 AM
To: Martin McGlensey <mmc...@fr...>
Cc: mat...@li...
Subject: Re: [Matplotlib-users] How do I make a Mercator map larger

 

Hi Martin,

 

Have you tried to save your figure and check if it does not enlarge your figure?

 

    plt.savefig("mercator.png")

 

Cheers,

Arnaldo.

 

---

Arnaldo D'Amaral Pereira Granja Russo

Universidade do Estado de Santa Catarina - UDESC

Pesquisador - Instituto Ambiental Boto Flipper

institutobotoflipper .org

 

2016-01-03 20:20 GMT-02:00 Martin McGlensey <mmc...@fr... <mailto:mmc...@fr...> >:

Hello,

 

I’m a new user to both python and basemap. I’ve got my map working OK, but would like to make it larger on the display. I’ve tried the height and width parameters in the map definition (m=basemap(…) and plt.figure(figuresize=(x,y)). Neither appear to have any effect on the size of the map.

 

Is there an easy way to convert map coordinates to inches?

 

Thanks,

Marty


------------------------------------------------------------------------------

_______________________________________________
Matplotlib-users mailing list
Mat...@li... <mailto:Mat...@li...> 
https://lists.sourceforge.net/lists/listinfo/matplotlib-users

 

Re: [Matplotlib-users] How do I make a Mercator map larger

[Benjamin R. <ben...@gm...>]

Without seeing the code, it would be hard to tell what is wrong. Setting
the figure size should work. I do this all the time myself.

As for converting map coordinates to inches, are you talking about inches
of the display? or inches of the map (as opposed to km or miles)?

Ben Root

On Sun, Jan 3, 2016 at 5:20 PM, Martin McGlensey <mmc...@fr...>
wrote:

> Hello,
>
>
>
> I’m a new user to both python and basemap. I’ve got my map working OK, but
> would like to make it larger on the display. I’ve tried the height and
> width parameters in the map definition (m=basemap(…) and
> plt.figure(figuresize=(x,y)). Neither appear to have any effect on the size
> of the map.
>
>
>
> Is there an easy way to convert map coordinates to inches?
>
>
>
> Thanks,
>
> Marty
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>

Re: [Matplotlib-users] How do I make a Mercator map larger

[Arnaldo R. <arn...@gm...>]

Hi Martin,

Have you tried to save your figure and check if it does not enlarge your
figure?

    plt.savefig("mercator.png")

Cheers,
Arnaldo.

---
Arnaldo D'Amaral Pereira Granja Russo
Universidade do Estado de Santa Catarina - UDESC
Pesquisador - Instituto Ambiental Boto Flipper
institutobotoflipper .org

2016-01-03 20:20 GMT-02:00 Martin McGlensey <mmc...@fr...>:

> Hello,
>
>
>
> I’m a new user to both python and basemap. I’ve got my map working OK, but
> would like to make it larger on the display. I’ve tried the height and
> width parameters in the map definition (m=basemap(…) and
> plt.figure(figuresize=(x,y)). Neither appear to have any effect on the size
> of the map.
>
>
>
> Is there an easy way to convert map coordinates to inches?
>
>
>
> Thanks,
>
> Marty
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>

[Matplotlib-users] How do I make a Mercator map larger

[Martin M. <mmc...@fr...>]

Hello,

 

I'm a new user to both python and basemap. I've got my map working OK, but
would like to make it larger on the display. I've tried the height and width
parameters in the map definition (m=basemap(.) and
plt.figure(figuresize=(x,y)). Neither appear to have any effect on the size
of the map.

 

Is there an easy way to convert map coordinates to inches?

 

Thanks,

Marty

Re: [Matplotlib-users] Set matplotlibrc color cycle to custom colors using axes.prop_cycle (v1.5)

[Julian I. <jul...@gm...>]

Ahh, the hashes were the problem!

Thanks for your help.

Julian

On Mon, Dec 21, 2015 at 8:45 AM, Benjamin Root <ben...@gm...> wrote:

> You can't use the hash symbol when doing colors as a hex in an rcfile. The
> rcfile parser is so simple that it treats it as a comment. Don't drop the
> quotes.
>
> Ben Root
>
> On Mon, Dec 21, 2015 at 12:51 AM, Thomas Caswell <tca...@gm...>
> wrote:
>
>> Not at a computer to test, but try dropping the quotes.
>>
>> On Sun, Dec 20, 2015, 20:56 Julian Irwin <jul...@gm...> wrote:
>>
>>> Hi,
>>>
>>> I'm trying to set my default color cycle in my matplotlibrc using
>>> axes.prop_cycle. The documentation (as far as I could find...) only gives
>>> examples like
>>>
>>> axes.prop_cycle    : cycler('color', 'bgrcmyk')
>>>
>>>
>>> And then the comment below says, cryptically:
>>>
>>> # as list of string colorspecs:
>>> # single letter, long name, or
>>> # web-style hex
>>>
>>> But I have tried all sorts of variatns on:
>>>
>>> axes.prop_cycle    : cycler('color', ['#e41a1c', '#377eb8', '#4daf4a', '#ff7f00', '#a65628', '#f781bf', '#999999', '#984ea3', '#ffff33'])
>>>
>>> But I always get an error upon importing matplotlib. Is there any doc on
>>> how to do this properly? Is this even supported?
>>>
>>> Thanks,
>>> Julian
>>>
>>> ------------------------------------------------------------------------------
>>> _______________________________________________
>>> Matplotlib-users mailing list
>>> Mat...@li...
>>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>>
>>
>>
>> ------------------------------------------------------------------------------
>>
>> _______________________________________________
>> Matplotlib-users mailing list
>> Mat...@li...
>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>
>>
>

Re: [Matplotlib-users] Set matplotlibrc color cycle to custom colors using axes.prop_cycle (v1.5)

[Benjamin R. <ben...@gm...>]

You can't use the hash symbol when doing colors as a hex in an rcfile. The
rcfile parser is so simple that it treats it as a comment. Don't drop the
quotes.

Ben Root

On Mon, Dec 21, 2015 at 12:51 AM, Thomas Caswell <tca...@gm...> wrote:

> Not at a computer to test, but try dropping the quotes.
>
> On Sun, Dec 20, 2015, 20:56 Julian Irwin <jul...@gm...> wrote:
>
>> Hi,
>>
>> I'm trying to set my default color cycle in my matplotlibrc using
>> axes.prop_cycle. The documentation (as far as I could find...) only gives
>> examples like
>>
>> axes.prop_cycle    : cycler('color', 'bgrcmyk')
>>
>>
>> And then the comment below says, cryptically:
>>
>> # as list of string colorspecs:
>> # single letter, long name, or
>> # web-style hex
>>
>> But I have tried all sorts of variatns on:
>>
>> axes.prop_cycle    : cycler('color', ['#e41a1c', '#377eb8', '#4daf4a', '#ff7f00', '#a65628', '#f781bf', '#999999', '#984ea3', '#ffff33'])
>>
>> But I always get an error upon importing matplotlib. Is there any doc on
>> how to do this properly? Is this even supported?
>>
>> Thanks,
>> Julian
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> Matplotlib-users mailing list
>> Mat...@li...
>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>

Re: [Matplotlib-users] Set matplotlibrc color cycle to custom colors using axes.prop_cycle (v1.5)

[Thomas C. <tca...@gm...>]

Not at a computer to test, but try dropping the quotes.

On Sun, Dec 20, 2015, 20:56 Julian Irwin <jul...@gm...> wrote:

> Hi,
>
> I'm trying to set my default color cycle in my matplotlibrc using
> axes.prop_cycle. The documentation (as far as I could find...) only gives
> examples like
>
> axes.prop_cycle    : cycler('color', 'bgrcmyk')
>
>
> And then the comment below says, cryptically:
>
> # as list of string colorspecs:
> # single letter, long name, or
> # web-style hex
>
> But I have tried all sorts of variatns on:
>
> axes.prop_cycle    : cycler('color', ['#e41a1c', '#377eb8', '#4daf4a', '#ff7f00', '#a65628', '#f781bf', '#999999', '#984ea3', '#ffff33'])
>
> But I always get an error upon importing matplotlib. Is there any doc on
> how to do this properly? Is this even supported?
>
> Thanks,
> Julian
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

[Matplotlib-users] Set matplotlibrc color cycle to custom colors using axes.prop_cycle (v1.5)

[Julian I. <jul...@gm...>]

Hi,

I'm trying to set my default color cycle in my matplotlibrc using
axes.prop_cycle. The documentation (as far as I could find...) only gives
examples like

axes.prop_cycle    : cycler('color', 'bgrcmyk')


And then the comment below says, cryptically:

# as list of string colorspecs:
# single letter, long name, or
# web-style hex

But I have tried all sorts of variatns on:

axes.prop_cycle    : cycler('color', ['#e41a1c', '#377eb8', '#4daf4a',
'#ff7f00', '#a65628', '#f781bf', '#999999', '#984ea3', '#ffff33'])

But I always get an error upon importing matplotlib. Is there any doc on
how to do this properly? Is this even supported?

Thanks,
Julian

Re: [Matplotlib-users] Matplotlib vers. 1.5.0 warnings

[Joshua K. <mob...@gm...>]

You can use the warnings module from the Python standard Library.

import warnings
warnings.filterwarnings(action='ignore')

This will silence all Python warnings. The signature for
warnings.filterwarnings
<https://docs.python.org/2/library/warnings.html#the-warnings-filter> can
also be used to only suppress some warnings.

On Thu, Dec 17, 2015 at 10:40 AM, Virgil Stokes <vs...@it...> wrote:

I recently upgraded to vers. 1.5.0 and I am now getting some warning
> messages.
> For example:
>
> D:\Python27\lib\site-packages\matplotlib\backend_managers.py:62:
> UserWarning:
> Treat the new Tool classes introduced in v1.5 as experimental for now, the
> API
> will likely change in version 2.1 and perhaps the rcParam as well
>    'version 2.1 and perhaps the rcParam as well')
> D:\Python27\lib\site-packages\matplotlib\backend_tools.py:78: UserWarning:
> Treat
> the new Tool classes introduced in v1.5 as experimental for now, the API
> will
> likely change in version 2.1, and some tools might change name
>    'version 2.1, and some tools might change name')
>
> How can I keep these messages from being displayed (at least temporarily)?
>
> --V
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
​

[Matplotlib-users] Matplotlib vers. 1.5.0 warnings

[Virgil S. <vs...@it...>]

I recently upgraded to vers. 1.5.0 and I am now getting some warning messages. 
For example:

D:\Python27\lib\site-packages\matplotlib\backend_managers.py:62: UserWarning: 
Treat the new Tool classes introduced in v1.5 as experimental for now, the API 
will likely change in version 2.1 and perhaps the rcParam as well
   'version 2.1 and perhaps the rcParam as well')
D:\Python27\lib\site-packages\matplotlib\backend_tools.py:78: UserWarning: Treat 
the new Tool classes introduced in v1.5 as experimental for now, the API will 
likely change in version 2.1, and some tools might change name
   'version 2.1, and some tools might change name')

How can I keep these messages from being displayed (at least temporarily)?

--V

[Matplotlib-users] How can I add parallel tick labels for north polar stereographic map?

[Chao Y. <cha...@gm...>]

Dear all matplotlib/basemap users,

I have made a plot like below using matplotib and basemap. The problem is
that I wan to add also parallel ticklabels for the circles higher than 40N.
Anybody knows how to achieve this? I checked the yticklabels for the map
axes but find it's not implemented as an original polar plot in matplotlib.
Thanks a lot in advance!


[image: Inline image 1]

-- 
please visit:
http://www.globalcarbonatlas.org/
***********************************************************************************
Chao YUE
postdoc at LSCE
CEA-Ormes des Merisiers, F-91191 GIF-SUR-YVETTE CEDEX
Tel: 33 1 69 08 41 87
************************************************************************************

Re: [Matplotlib-users] SpanSelector span_stays does not work for me

[Benjamin R. <ben...@gm...>]

Have you tried setting "useblit=False"? If that works, I wonder if we
accidentally broke something in the recent widget interactivity work...


Ben Root

On Fri, Dec 11, 2015 at 7:48 PM, Edward Richards <edw...@gm...>
wrote:

> I am selecting a region of a color plot with span selector, and I would
> like the selected region to stay highlighted. I found the span_stays flag,
> but the selection rectangle still disappears after I release the mouse.
>
> Any help is appreciated.
> Thanks,
> Ned
>
> My backend is 'TkAgg'
>
> I am running the script from python3.4 at the command line, my version is:
>
> Python 3.4.3 (default, Jun 19 2015, 05:46:30)
> [GCC 4.8.3 20140911 (Red Hat 4.8.3-9)] on linux
> Type "help", "copyright", "credits" or "license" for more information.
>
> >>> print(matplotlib.__version__)
> 1.5.0
>
> code example:
>
> import numpy as np
> import matplotlib.pyplot as plt
> from matplotlib.widgets import SpanSelector
>
> test_data = np.random.randn(1000, 1000)
> fig, ax = plt.subplots()
> ax.imshow(test_data)
>
> def selection(x1, x2):
>      """This function isn't the point"""
>      pass
>
> span = SpanSelector(ax, selection, 'horizontal', useblit=True,
>                      rectprops=dict(alpha=0.5, facecolor='red'),
> span_stays=True)
> plt.show()
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

[Matplotlib-users] SpanSelector span_stays does not work for me

[Edward R. <edw...@gm...>]

I am selecting a region of a color plot with span selector, and I would like the selected region to stay highlighted. I found the span_stays flag, but the selection rectangle still disappears after I release the mouse.

Any help is appreciated.
Thanks,
Ned

My backend is 'TkAgg'

I am running the script from python3.4 at the command line, my version is:

Python 3.4.3 (default, Jun 19 2015, 05:46:30)
[GCC 4.8.3 20140911 (Red Hat 4.8.3-9)] on linux
Type "help", "copyright", "credits" or "license" for more information.

>>> print(matplotlib.__version__)
1.5.0

code example:

import numpy as np
import matplotlib.pyplot as plt
from matplotlib.widgets import SpanSelector

test_data = np.random.randn(1000, 1000)
fig, ax = plt.subplots()
ax.imshow(test_data)

def selection(x1, x2):
     """This function isn't the point"""
     pass

span = SpanSelector(ax, selection, 'horizontal', useblit=True,
                     rectprops=dict(alpha=0.5, facecolor='red'), span_stays=True)
plt.show()

Re: [Matplotlib-users] no plots showing

[Paul H. <pau...@gm...>]

This all makes sense - thanks so much for your help!

Paul

On 27 Nov 2015, at 14:38, Jens Nielsen <jen...@gm...> wrote:

That makes sense. The agg backend is a non graphical backend intended for saving image output. I don't know why this is the default one on your system.

if you start your python session with:
```
import matplotlib
matplotlib.use('TkAgg') 
...
```

You will select the TkAgg backend which is interactive and normally installed. I don't know which ones are available on your system but see the link below for various possibilities that you may try instead. This also contains information about how the backends are set.  http://matplotlib.org/faq/usage_faq.html#what-is-a-backend

Note that the MPLBACKEND environmental variable was not added until matplotlib 1.5

best
Jens

> On Fri, 27 Nov 2015 at 14:30 Paul Harrison <pau...@gm...> wrote:
> I get:
> 
> >>> plt.show()
> >>> import matplotlib
> >>> matplotlib.get_backend()
> 'agg'
> >>> 
> 
> 
>> On Fri, Nov 27, 2015 at 12:40 PM, Jens Nielsen <jen...@gm...> wrote:
>> Can you try to check which backend you are using
>> Do something like
>> >>> import matplotlib
>> >>> matplotlib.get_backend()
>> 
>> after your plot. It is possible that your machine is set to use a non graphical backend
>> 
>> best
>> Jens
>>> On Fri, 27 Nov 2015 at 12:29 Paul Harrison <pau...@gm...> wrote:
>>> 
>>> Here's some output from an ssh -Y to another machine - I also get the same result working on the console (no plots appearing).
>>> 
>>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12) 
>>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>> Type "help", "copyright", "credits" or "license" for more information.
>>> >>> import pylab as plt
>>> >>> plt.figure()
>>> <matplotlib.figure.Figure object at 0x16e5310>
>>> >>> plt.hist([1.0,2,0])
>>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,  0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10 Patch objects>)
>>> >>> plt.show()
>>> >>> 
>>> 
>>> Thanks,
>>> 
>>> Paul
>>> 
>>> 
>>>> On Fri, Nov 27, 2015 at 12:10 PM, Jens Nielsen <jen...@gm...> wrote:
>>>> Sorry but the parentheses have not gone missing in your copy paste. The line below will only be printed if you don't have any parentheses after the function. Can you try again and show the output of actually calling plt.show()?
>>>> 
>>>> Best
>>>> Jens 
>>>> 
>>>>> On Fri, 27 Nov 2015 at 11:58 Paul Harrison <pau...@gm...> wrote:
>>>>> Apologies, the parentheses must have got missed off when I copied and pasted the output from my terminal.
>>>>> 
>>>>> Same issue though, I don't get any plots come up. This always used to work, and works for my colleagues!
>>>>> 
>>>>> Paul
>>>>> 
>>>>>> On Fri, Nov 27, 2015 at 11:35 AM, Paul Harrison <pau...@gm...> wrote:
>>>>>> 
>>>>>> Hi guys,
>>>>>> 
>>>>>> If I do the following, no plot shows:
>>>>>> 
>>>>>> ply5@xroa-dt-20:~> python
>>>>>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12) 
>>>>>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>>>>> Type "help", "copyright", "credits" or "license" for more information.
>>>>>> >>> import pylab as plt
>>>>>> >>> plt.figure()
>>>>>> <matplotlib.figure.Figure object at 0x16e5310>
>>>>>> >>> plt.hist([1.0,2,0])
>>>>>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,  0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10 Patch objects>)
>>>>>> >>> plt.show
>>>>>> <function show at 0x1730b90>
>>>>>> >>> 
>>>>>> 
>>>>>> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib v1.3.1-70.11.
>>>>>> 
>>>>>> Anyone have any ideas? I'm a bit of a matplotlib beginner so any advice is extremely welcome!
>>>>>> 
>>>>>> Thanks,
>>>>>> 
>>>>>> Paul
>>>>> 
>>>>> ------------------------------------------------------------------------------
>>>>> _______________________________________________
>>>>> Matplotlib-users mailing list
>>>>> Mat...@li...
>>>>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>> 
>>> ------------------------------------------------------------------------------
>>> _______________________________________________
>>> Matplotlib-users mailing list
>>> Mat...@li...
>>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users

Re: [Matplotlib-users] no plots showing

[Jens N. <jen...@gm...>]

That makes sense. The agg backend is a non graphical backend intended for
saving image output. I don't know why this is the default one on your
system.

if you start your python session with:
```
import matplotlib
matplotlib.use('TkAgg')
...
```

You will select the TkAgg backend which is interactive and normally
installed. I don't know which ones are available on your system but see the
link below for various possibilities that you may try instead. This also
contains information about how the backends are set.
http://matplotlib.org/faq/usage_faq.html#what-is-a-backend

Note that the MPLBACKEND environmental variable was not added until
matplotlib 1.5

best
Jens

On Fri, 27 Nov 2015 at 14:30 Paul Harrison <pau...@gm...>
wrote:

> I get:
>
> >>> plt.show()
>
> >>> import matplotlib
>
> >>> matplotlib.get_backend()
>
> 'agg'
>
> >>>
>
>
> On Fri, Nov 27, 2015 at 12:40 PM, Jens Nielsen <jen...@gm...>
> wrote:
>
>> Can you try to check which backend you are using
>> Do something like
>> >>> import matplotlib
>> >>> matplotlib.get_backend()
>>
>> after your plot. It is possible that your machine is set to use a non
>> graphical backend
>>
>> best
>> Jens
>> On Fri, 27 Nov 2015 at 12:29 Paul Harrison <pau...@gm...>
>> wrote:
>>
>>>
>>> Here's some output from an ssh -Y to another machine - I also get the
>>> same result working on the console (no plots appearing).
>>>
>>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>>>
>>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>>
>>> Type "help", "copyright", "credits" or "license" for more information.
>>>
>>> >>> import pylab as plt
>>>
>>> >>> plt.figure()
>>>
>>> <matplotlib.figure.Figure object at 0x16e5310>
>>>
>>> >>> plt.hist([1.0,2,0])
>>>
>>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0.
>>> ,  0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of
>>> 10 Patch objects>)
>>>
>>> >>> plt.show()
>>>
>>> >>>
>>>
>>> Thanks,
>>>
>>> Paul
>>>
>>>
>>> On Fri, Nov 27, 2015 at 12:10 PM, Jens Nielsen <jen...@gm...>
>>> wrote:
>>>
>>>> Sorry but the parentheses have not gone missing in your copy paste. The
>>>> line below will only be printed if you don't have any parentheses after the
>>>> function. Can you try again and show the output of actually calling
>>>> plt.show()?
>>>>
>>>> Best
>>>> Jens
>>>>
>>>> On Fri, 27 Nov 2015 at 11:58 Paul Harrison <pau...@gm...>
>>>> wrote:
>>>>
>>>>> Apologies, the parentheses must have got missed off when I copied and
>>>>> pasted the output from my terminal.
>>>>>
>>>>> Same issue though, I don't get any plots come up. This always used to
>>>>> work, and works for my colleagues!
>>>>>
>>>>> Paul
>>>>>
>>>>> On Fri, Nov 27, 2015 at 11:35 AM, Paul Harrison <
>>>>> pau...@gm...> wrote:
>>>>>
>>>>>>
>>>>>> Hi guys,
>>>>>>
>>>>>> If I do the following, no plot shows:
>>>>>>
>>>>>> ply5@xroa-dt-20:~> python
>>>>>>
>>>>>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>>>>>>
>>>>>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>>>>>
>>>>>> Type "help", "copyright", "credits" or "license" for more information.
>>>>>>
>>>>>> >>> import pylab as plt
>>>>>>
>>>>>> >>> plt.figure()
>>>>>>
>>>>>> <matplotlib.figure.Figure object at 0x16e5310>
>>>>>>
>>>>>> >>> plt.hist([1.0,2,0])
>>>>>>
>>>>>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([
>>>>>> 0. ,  0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list
>>>>>> of 10 Patch objects>)
>>>>>>
>>>>>> >>> plt.show
>>>>>>
>>>>>> <function show at 0x1730b90>
>>>>>>
>>>>>> >>>
>>>>>>
>>>>>> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
>>>>>> v1.3.1-70.11.
>>>>>>
>>>>>> Anyone have any ideas? I'm a bit of a matplotlib beginner so any
>>>>>> advice is extremely welcome!
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>> Paul
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>> ------------------------------------------------------------------------------
>>>>> _______________________________________________
>>>>> Matplotlib-users mailing list
>>>>> Mat...@li...
>>>>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>>>>
>>>>
>>>
>>> ------------------------------------------------------------------------------
>>> _______________________________________________
>>> Matplotlib-users mailing list
>>> Mat...@li...
>>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>>
>>
>

Re: [Matplotlib-users] no plots showing

[Paul H. <pau...@gm...>]

I get:

>>> plt.show()

>>> import matplotlib

>>> matplotlib.get_backend()

'agg'

>>>


On Fri, Nov 27, 2015 at 12:40 PM, Jens Nielsen <jen...@gm...>
wrote:

> Can you try to check which backend you are using
> Do something like
> >>> import matplotlib
> >>> matplotlib.get_backend()
>
> after your plot. It is possible that your machine is set to use a non
> graphical backend
>
> best
> Jens
> On Fri, 27 Nov 2015 at 12:29 Paul Harrison <pau...@gm...>
> wrote:
>
>>
>> Here's some output from an ssh -Y to another machine - I also get the
>> same result working on the console (no plots appearing).
>>
>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>>
>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>
>> Type "help", "copyright", "credits" or "license" for more information.
>>
>> >>> import pylab as plt
>>
>> >>> plt.figure()
>>
>> <matplotlib.figure.Figure object at 0x16e5310>
>>
>> >>> plt.hist([1.0,2,0])
>>
>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,
>> 0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10
>> Patch objects>)
>>
>> >>> plt.show()
>>
>> >>>
>>
>> Thanks,
>>
>> Paul
>>
>>
>> On Fri, Nov 27, 2015 at 12:10 PM, Jens Nielsen <jen...@gm...>
>> wrote:
>>
>>> Sorry but the parentheses have not gone missing in your copy paste. The
>>> line below will only be printed if you don't have any parentheses after the
>>> function. Can you try again and show the output of actually calling
>>> plt.show()?
>>>
>>> Best
>>> Jens
>>>
>>> On Fri, 27 Nov 2015 at 11:58 Paul Harrison <pau...@gm...>
>>> wrote:
>>>
>>>> Apologies, the parentheses must have got missed off when I copied and
>>>> pasted the output from my terminal.
>>>>
>>>> Same issue though, I don't get any plots come up. This always used to
>>>> work, and works for my colleagues!
>>>>
>>>> Paul
>>>>
>>>> On Fri, Nov 27, 2015 at 11:35 AM, Paul Harrison <
>>>> pau...@gm...> wrote:
>>>>
>>>>>
>>>>> Hi guys,
>>>>>
>>>>> If I do the following, no plot shows:
>>>>>
>>>>> ply5@xroa-dt-20:~> python
>>>>>
>>>>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>>>>>
>>>>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>>>>
>>>>> Type "help", "copyright", "credits" or "license" for more information.
>>>>>
>>>>> >>> import pylab as plt
>>>>>
>>>>> >>> plt.figure()
>>>>>
>>>>> <matplotlib.figure.Figure object at 0x16e5310>
>>>>>
>>>>> >>> plt.hist([1.0,2,0])
>>>>>
>>>>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0.
>>>>> ,  0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of
>>>>> 10 Patch objects>)
>>>>>
>>>>> >>> plt.show
>>>>>
>>>>> <function show at 0x1730b90>
>>>>>
>>>>> >>>
>>>>>
>>>>> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
>>>>> v1.3.1-70.11.
>>>>>
>>>>> Anyone have any ideas? I'm a bit of a matplotlib beginner so any
>>>>> advice is extremely welcome!
>>>>>
>>>>> Thanks,
>>>>>
>>>>> Paul
>>>>>
>>>>>
>>>>>
>>>>
>>>> ------------------------------------------------------------------------------
>>>> _______________________________________________
>>>> Matplotlib-users mailing list
>>>> Mat...@li...
>>>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>>>
>>>
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> Matplotlib-users mailing list
>> Mat...@li...
>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>
>

Re: [Matplotlib-users] no plots showing

[Dominik K. <dk...@as...>]

Are you logged in on another machine? If so, you might be connected via the
'ssh' command and not 'ssh -X'.

Dominik

2015-11-27 12:58 GMT+01:00 Paul Harrison <pau...@gm...>:

> Apologies, the parentheses must have got missed off when I copied and
> pasted the output from my terminal.
>
> Same issue though, I don't get any plots come up. This always used to
> work, and works for my colleagues!
>
> Paul
>
> On Fri, Nov 27, 2015 at 11:35 AM, Paul Harrison <
> pau...@gm...> wrote:
>
>>
>> Hi guys,
>>
>> If I do the following, no plot shows:
>>
>> ply5@xroa-dt-20:~> python
>>
>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>>
>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>
>> Type "help", "copyright", "credits" or "license" for more information.
>>
>> >>> import pylab as plt
>>
>> >>> plt.figure()
>>
>> <matplotlib.figure.Figure object at 0x16e5310>
>>
>> >>> plt.hist([1.0,2,0])
>>
>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,
>> 0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10
>> Patch objects>)
>>
>> >>> plt.show
>>
>> <function show at 0x1730b90>
>>
>> >>>
>>
>> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
>> v1.3.1-70.11.
>>
>> Anyone have any ideas? I'm a bit of a matplotlib beginner so any advice
>> is extremely welcome!
>>
>> Thanks,
>>
>> Paul
>>
>>
>>
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>


-- 
Dominik Klaes
Argelander-Institut für Astronomie
Room 2.027a
Auf dem Hügel 71
53121 Bonn

Telefon: 0228/73-5773
E-Mail: dk...@as... <dk...@as...>

Re: [Matplotlib-users] no plots showing

[Jens N. <jen...@gm...>]

Can you try to check which backend you are using
Do something like
>>> import matplotlib
>>> matplotlib.get_backend()

after your plot. It is possible that your machine is set to use a non
graphical backend

best
Jens
On Fri, 27 Nov 2015 at 12:29 Paul Harrison <pau...@gm...>
wrote:

>
> Here's some output from an ssh -Y to another machine - I also get the same
> result working on the console (no plots appearing).
>
> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>
> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>
> Type "help", "copyright", "credits" or "license" for more information.
>
> >>> import pylab as plt
>
> >>> plt.figure()
>
> <matplotlib.figure.Figure object at 0x16e5310>
>
> >>> plt.hist([1.0,2,0])
>
> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,
> 0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10
> Patch objects>)
>
> >>> plt.show()
>
> >>>
>
> Thanks,
>
> Paul
>
>
> On Fri, Nov 27, 2015 at 12:10 PM, Jens Nielsen <jen...@gm...>
> wrote:
>
>> Sorry but the parentheses have not gone missing in your copy paste. The
>> line below will only be printed if you don't have any parentheses after the
>> function. Can you try again and show the output of actually calling
>> plt.show()?
>>
>> Best
>> Jens
>>
>> On Fri, 27 Nov 2015 at 11:58 Paul Harrison <pau...@gm...>
>> wrote:
>>
>>> Apologies, the parentheses must have got missed off when I copied and
>>> pasted the output from my terminal.
>>>
>>> Same issue though, I don't get any plots come up. This always used to
>>> work, and works for my colleagues!
>>>
>>> Paul
>>>
>>> On Fri, Nov 27, 2015 at 11:35 AM, Paul Harrison <
>>> pau...@gm...> wrote:
>>>
>>>>
>>>> Hi guys,
>>>>
>>>> If I do the following, no plot shows:
>>>>
>>>> ply5@xroa-dt-20:~> python
>>>>
>>>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>>>>
>>>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>>>
>>>> Type "help", "copyright", "credits" or "license" for more information.
>>>>
>>>> >>> import pylab as plt
>>>>
>>>> >>> plt.figure()
>>>>
>>>> <matplotlib.figure.Figure object at 0x16e5310>
>>>>
>>>> >>> plt.hist([1.0,2,0])
>>>>
>>>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0.
>>>> ,  0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of
>>>> 10 Patch objects>)
>>>>
>>>> >>> plt.show
>>>>
>>>> <function show at 0x1730b90>
>>>>
>>>> >>>
>>>>
>>>> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
>>>> v1.3.1-70.11.
>>>>
>>>> Anyone have any ideas? I'm a bit of a matplotlib beginner so any advice
>>>> is extremely welcome!
>>>>
>>>> Thanks,
>>>>
>>>> Paul
>>>>
>>>>
>>>>
>>>
>>> ------------------------------------------------------------------------------
>>> _______________________________________________
>>> Matplotlib-users mailing list
>>> Mat...@li...
>>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>>
>>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

Re: [Matplotlib-users] no plots showing

[Paul H. <pau...@gm...>]

Here's some output from an ssh -Y to another machine - I also get the same
result working on the console (no plots appearing).

Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)

[GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2

Type "help", "copyright", "credits" or "license" for more information.

>>> import pylab as plt

>>> plt.figure()

<matplotlib.figure.Figure object at 0x16e5310>

>>> plt.hist([1.0,2,0])

(array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,
0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10
Patch objects>)

>>> plt.show()

>>>

Thanks,

Paul


On Fri, Nov 27, 2015 at 12:10 PM, Jens Nielsen <jen...@gm...>
wrote:

> Sorry but the parentheses have not gone missing in your copy paste. The
> line below will only be printed if you don't have any parentheses after the
> function. Can you try again and show the output of actually calling
> plt.show()?
>
> Best
> Jens
>
> On Fri, 27 Nov 2015 at 11:58 Paul Harrison <pau...@gm...>
> wrote:
>
>> Apologies, the parentheses must have got missed off when I copied and
>> pasted the output from my terminal.
>>
>> Same issue though, I don't get any plots come up. This always used to
>> work, and works for my colleagues!
>>
>> Paul
>>
>> On Fri, Nov 27, 2015 at 11:35 AM, Paul Harrison <
>> pau...@gm...> wrote:
>>
>>>
>>> Hi guys,
>>>
>>> If I do the following, no plot shows:
>>>
>>> ply5@xroa-dt-20:~> python
>>>
>>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>>>
>>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>>
>>> Type "help", "copyright", "credits" or "license" for more information.
>>>
>>> >>> import pylab as plt
>>>
>>> >>> plt.figure()
>>>
>>> <matplotlib.figure.Figure object at 0x16e5310>
>>>
>>> >>> plt.hist([1.0,2,0])
>>>
>>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0.
>>> ,  0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of
>>> 10 Patch objects>)
>>>
>>> >>> plt.show
>>>
>>> <function show at 0x1730b90>
>>>
>>> >>>
>>>
>>> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
>>> v1.3.1-70.11.
>>>
>>> Anyone have any ideas? I'm a bit of a matplotlib beginner so any advice
>>> is extremely welcome!
>>>
>>> Thanks,
>>>
>>> Paul
>>>
>>>
>>>
>>
>> ------------------------------------------------------------------------------
>> _______________________________________________
>> Matplotlib-users mailing list
>> Mat...@li...
>> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>>
>

Re: [Matplotlib-users] no plots showing

[Jens N. <jen...@gm...>]

Sorry but the parentheses have not gone missing in your copy paste. The
line below will only be printed if you don't have any parentheses after the
function. Can you try again and show the output of actually calling
plt.show()?

Best
Jens

On Fri, 27 Nov 2015 at 11:58 Paul Harrison <pau...@gm...>
wrote:

> Apologies, the parentheses must have got missed off when I copied and
> pasted the output from my terminal.
>
> Same issue though, I don't get any plots come up. This always used to
> work, and works for my colleagues!
>
> Paul
>
> On Fri, Nov 27, 2015 at 11:35 AM, Paul Harrison <
> pau...@gm...> wrote:
>
>>
>> Hi guys,
>>
>> If I do the following, no plot shows:
>>
>> ply5@xroa-dt-20:~> python
>>
>> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>>
>> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>>
>> Type "help", "copyright", "credits" or "license" for more information.
>>
>> >>> import pylab as plt
>>
>> >>> plt.figure()
>>
>> <matplotlib.figure.Figure object at 0x16e5310>
>>
>> >>> plt.hist([1.0,2,0])
>>
>> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,
>> 0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10
>> Patch objects>)
>>
>> >>> plt.show
>>
>> <function show at 0x1730b90>
>>
>> >>>
>>
>> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
>> v1.3.1-70.11.
>>
>> Anyone have any ideas? I'm a bit of a matplotlib beginner so any advice
>> is extremely welcome!
>>
>> Thanks,
>>
>> Paul
>>
>>
>>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>

Re: [Matplotlib-users] no plots showing

[Paul H. <pau...@gm...>]

Apologies, the parentheses must have got missed off when I copied and
pasted the output from my terminal.

Same issue though, I don't get any plots come up. This always used to work,
and works for my colleagues!

Paul

On Fri, Nov 27, 2015 at 11:35 AM, Paul Harrison <pau...@gm...
> wrote:

>
> Hi guys,
>
> If I do the following, no plot shows:
>
> ply5@xroa-dt-20:~> python
>
> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>
> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>
> Type "help", "copyright", "credits" or "license" for more information.
>
> >>> import pylab as plt
>
> >>> plt.figure()
>
> <matplotlib.figure.Figure object at 0x16e5310>
>
> >>> plt.hist([1.0,2,0])
>
> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,
> 0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10
> Patch objects>)
>
> >>> plt.show
>
> <function show at 0x1730b90>
>
> >>>
>
> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
> v1.3.1-70.11.
>
> Anyone have any ideas? I'm a bit of a matplotlib beginner so any advice is
> extremely welcome!
>
> Thanks,
>
> Paul
>
>
>

Re: [Matplotlib-users] no plots showing

[Christian A. <ia...@gm...>]

You're missing a pair of parentheses. Without it, you're just referring to
the function itself.

plt.show()
On Nov 27, 2015 11:36 AM, "Paul Harrison" <pau...@gm...>
wrote:

>
> Hi guys,
>
> If I do the following, no plot shows:
>
> ply5@xroa-dt-20:~> python
>
> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>
> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>
> Type "help", "copyright", "credits" or "license" for more information.
>
> >>> import pylab as plt
>
> >>> plt.figure()
>
> <matplotlib.figure.Figure object at 0x16e5310>
>
> >>> plt.hist([1.0,2,0])
>
> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,
> 0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10
> Patch objects>)
>
> >>> plt.show
>
> <function show at 0x1730b90>
>
> >>>
>
> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
> v1.3.1-70.11.
>
> Anyone have any ideas? I'm a bit of a matplotlib beginner so any advice is
> extremely welcome!
>
> Thanks,
>
> Paul
>
>
>
>
> ------------------------------------------------------------------------------
>
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>
>

Re: [Matplotlib-users] no plots showing

[Jens N. <jen...@gm...>]

plt.show is a function. You are not calling it just displaying it. Try
doing plt.show()

BTW please use the new mailing list at mat...@py...

best
Jens

On Fri, 27 Nov 2015 at 11:36 Paul Harrison <pau...@gm...>
wrote:

>
> Hi guys,
>
> If I do the following, no plot shows:
>
> ply5@xroa-dt-20:~> python
>
> Python 2.6.9 (unknown, Apr  7 2015, 08:28:12)
>
> [GCC 4.3.4 [gcc-4_3-branch revision 152973]] on linux2
>
> Type "help", "copyright", "credits" or "license" for more information.
>
> >>> import pylab as plt
>
> >>> plt.figure()
>
> <matplotlib.figure.Figure object at 0x16e5310>
>
> >>> plt.hist([1.0,2,0])
>
> (array([ 1.,  0.,  0.,  0.,  0.,  1.,  0.,  0.,  0.,  1.]), array([ 0. ,
> 0.2,  0.4,  0.6,  0.8,  1. ,  1.2,  1.4,  1.6,  1.8,  2. ]), <a list of 10
> Patch objects>)
>
> >>> plt.show
>
> <function show at 0x1730b90>
>
> >>>
>
> I'm using SUSE Linux Enterprise 11 SP3 64-bit with python-matplotlib
> v1.3.1-70.11.
>
> Anyone have any ideas? I'm a bit of a matplotlib beginner so any advice is
> extremely welcome!
>
> Thanks,
>
> Paul
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Matplotlib-users mailing list
> Mat...@li...
> https://lists.sourceforge.net/lists/listinfo/matplotlib-users
>