[Madwifi-devel] setting 11a mode and bringing ath0 up errror mesages

[Dino J. M. <din...@ya...>]

My config: CentOS 2.6.18-92.el5
madwifi revision 4032, also tried 4020
used the below script

    interface=`wlanconfig ath create wlandev wifi0 wlanmode ap`
    iwpriv $interface mode 11a
    iwconfig $interface essid "test"
    iwconfig  $interface freq 5825M
    ifconfig $interface up

if i remove the iwconfig  $interface freq 5825M, below error not coming.



wlan: mac acl policy registered
PCI: Enabling device 0000:02:02.0 (0210 -> 0212)
ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 17 (level, low) -> IRQ 169
MadWifi: ath_attach: Switching rfkill capability off.
wifi0: Atheros AR5414 chip found (MAC 10.5, PHY SChip 6.1, Radio 6.3)
ath_pci: wifi0: Atheros 5413: mem=0x50000000, irq=169
BUG: warning at
/home/brodev/work/wifi/madwifihal/madwifi/ath/if_ath.c:8600/ath_stoprecv()
(Tainted: G     )
 [<f8fcecc3>] ath_stoprecv+0x1d1/0x478 [ath_pci]
 [<f8fd6834>] ath_beacon_generate+0xd14/0x1436 [ath_pci]
 [<f8fd6ec2>] ath_beacon_generate+0x13a2/0x1436 [ath_pci]
 [<f8fd469e>] ath_reset+0xd5/0x2c0 [ath_pci]
 [<f8e1d2a6>] ar5212GetRfgain+0x1b7/0x31d [ath_hal]
 [<f8fd895c>] ath_calibrate+0x26c/0x4da [ath_pci]
 [<f8e1d849>] ar5212NumTxPending+0x28/0x3c [ath_hal]
 [<f8e1d9c1>] ar5212StopTxDma+0x164/0x173 [ath_hal]
 [<f8fd96dd>] ath_beacon_send+0xb13/0xb52 [ath_pci]
 [<c041ea34>] __wake_up_common+0x2f/0x53
 [<f8fe8d21>] ath_intr+0xa12/0x232b [ath_pci]
 [<c041f82e>] __wake_up+0x2a/0x3d
 [<c058e1c1>] input_event+0x3e6/0x407
 [<c042d84e>] do_timer+0x791/0x8a7
 [<c044dd9b>] handle_IRQ_event+0x23/0x49
 [<c044de45>] __do_IRQ+0x84/0xd6
 [<c04073f4>] do_IRQ+0x93/0xae
 [<c040592e>] common_interrupt+0x1a/0x20
 [<c0403ccf>] mwait_idle+0x25/0x38
 [<c0403c90>] cpu_idle+0x9f/0xb9
 [<c06ec9ee>] start_kernel+0x379/0x380
 =======================