[Madwifi-users] system freezes
Status: Beta
Brought to you by:
otaku
Menu
▾
▴
[Madwifi-users] system freezes
|
From: kasp <wa...@in...> - 2005-09-16 19:06:32
|
Hello! Strange problem appeared today. Everything is working fine, but then system suddenly freezes. In last two hours system freezes aprox. 1x per 20minutes. I was using BSD branch all the time without any problems. Just now switched to MAIN branch, but don't know if freezing will repeat, anyway here's output: ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413) wlan: 0.8.6.0 (EXPERIMENTAL) ath_rate_sample: 1.2 ath_pci: 0.9.6.0 (EXPERIMENTAL) ath0: Atheros 5211: mem=0xff960000, irq=17 ath1: Atheros 5211: mem=0xff950000, irq=22 ath2: Atheros 5211: mem=0xff940000, irq=21 ath3: Atheros 5212: mem=0xff970000, irq=19 Warning: loading /lib/modules/2.4.29/net/ath_hal.o will taint the kernel: non-GPL license - Propr See http://www.tux.org/lkml/#export-tainted for information about tainted modules Module ath_hal loaded, with warnings Module wlan loaded, with warnings Module ath_rate_sample loaded, with warnings Module ath_pci loaded, with warnings Build date: Sep 16 2005 Debugging version (IEEE80211) ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: H/W encryption support: WEP AES ath0: mac 4.2 phy 3.0 5ghz radio 1.7 2ghz radio 2.3 ath0: Use hw queue 0 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 0 for WME_AC_VI traffic ath0: Use hw queue 0 for WME_AC_VO traffic ath0: Use hw queue 8 for CAB traffic ath0: Use hw queue 9 for beacons Debugging version (ATH) Build date: Sep 16 2005 Debugging version (IEEE80211) ath1: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath1: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath1: H/W encryption support: WEP AES ath1: mac 4.2 phy 3.0 5ghz radio 1.7 2ghz radio 2.3 ath1: Use hw queue 0 for WME_AC_BE traffic ath1: Use hw queue 0 for WME_AC_BK traffic ath1: Use hw queue 0 for WME_AC_VI traffic ath1: Use hw queue 0 for WME_AC_VO traffic ath1: Use hw queue 8 for CAB traffic ath1: Use hw queue 9 for beacons Debugging version (ATH) Build date: Sep 16 2005 Debugging version (IEEE80211) ath2: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath2: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath2: H/W encryption support: WEP AES ath2: mac 4.2 phy 3.0 5ghz radio 1.7 2ghz radio 2.3 ath2: Use hw queue 0 for WME_AC_BE traffic ath2: Use hw queue 0 for WME_AC_BK traffic ath2: Use hw queue 0 for WME_AC_VI traffic ath2: Use hw queue 0 for WME_AC_VO traffic ath2: Use hw queue 8 for CAB traffic ath2: Use hw queue 9 for beacons Debugging version (ATH) Build date: Sep 16 2005 Debugging version (IEEE80211) ath3: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath3: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath3: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath3: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath3: H/W encryption support: WEP AES AES_CCM TKIP ath3: mac 5.9 phy 4.3 radio 3.6 ath3: Use hw queue 1 for WME_AC_BE traffic ath3: Use hw queue 0 for WME_AC_BK traffic ath3: Use hw queue 2 for WME_AC_VI traffic ath3: Use hw queue 3 for WME_AC_VO traffic ath3: Use hw queue 8 for CAB traffic ath3: Use hw queue 9 for beacons Debugging version (ATH) ath0: creating bss 00:01:24:70:33:7c ath2: creating bss 00:01:24:70:56:bc ath1: creating bss 00:01:24:70:52:e0 P.S. Till now system didn't freeze (21:58:14 up 43 min) -- Best regards, kasp mailto:wa...@in... |