[Madwifi-users] Re: Atheros AR5004X

[Miguel de V. B. <mi...@as...>]

Hi,

Thanks for your answer. The problem was that the D-link DWL A660 come
with a new chip that is not supported yet. There is a message "unknown
PCI ID for new DLINK DWL-AG660" from 2005-07-25 from somebody with the
same card H/W ver.:B2, FW ver.:2.10 and Atheros device 168c:001b .

Thanks
Miguel

>  Quoting Miguel de Val Borro (miguel@as...):
>  > Hello,
>  > 
>  > I have a D-link DWL AG660 card with AR5004X chipset which is not working.
>  > The Madwifi driver was installed with the kernel 2.6.8 in a Debian machine. 
>  > The output of "lspci -v" gives
>  > 
>  > 0000:03:00.0 Ethernet controller: Atheros Communications, Inc.: Unknown device 001b (rev
> 01)
>  >         Subsystem: D-Link System Inc: Unknown device 3a19
>  >         Flags: medium devsel, IRQ 11
>  >         Memory at 10800000 (32-bit, non-prefetchable) [size=64K]
>  >         Capabilities: [44] Power Management version 2
>  > 
>  > 
>  > and "cardctl info"
>  > PRODID_1="Atheros Communications, Inc."
>  > PRODID_2="AR5001-0000-0000"
>  > PRODID_3="Wireless LAN Reference Card"
>  > PRODID_4="00"
>  > MANFID=0271,0012
>  > FUNCID=6
>  > 
>  > After the module is loaded: 
>  > 
>  
>  Hi,
>  
>  Can you post the output ypu get from dmesg after the driver loads? That
>  should give us more of an idea what might be going wrong. Also, there
>  should be more than one module loading.
>  
>  Matt
>  
>  
>  -- 
>  Time exists so that everything doesn"t happen at once, 
>  space exists so that everything doesn"t happen to you.
>  Matt Foster | http://www.mattfoster.clara.co.uk 
>  
>