[Madwifi-users] WG511T build but doesn't work
Status: Beta
Brought to you by:
otaku
Menu
▾
▴
[Madwifi-users] WG511T build but doesn't work
|
From: Davide G. <dav...@li...> - 2005-01-23 17:56:25
|
Hi.
I'm trying to setup a Netgear WG511T on a debian sarge, i'm using 2.6.9
with wireless enabled and latest madwifi-cvs correctly build.
I'm trying to connect to a netgear ap (DG834G) with encryption disabled
and with one essid, here it's the command that i use:
iwconfig ath0 essid "NETGEAR"
dhclient ath0
and dhclient is unable to find the dhcp server.
if i try to bypass the dhcp server i get:
ifconfig ath0 192.168.0.20 netmask 255.255.255.0 up
# ping 192.168.0.254
PING 192.168.0.254 (192.168.0.254): 56 data bytes
64 bytes from 192.168.0.254: icmp_seq=0 ttl=255 time=20.0 ms
wrong data byte #20 should be 0x14 but was 0x65
65 71 75 8c 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28
29 2a 2b 2c 2d 2e 2f 30 31 32 33
34 35 36 37 98 53 e9 b7 84 dc 5 8 ff ff ff ff
64 bytes from 192.168.0.254: icmp_seq=3 ttl=255 time=2.8 ms
wrong data byte #52 should be 0x34 but was 0xc0
14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28
29 2a 2b 2c 2d 2e 2f 30 31 32 33
c0 3c e 8 98 53 e9 b7 84 dc 5 8 ff ff ff ff
64 bytes from 192.168.0.254: icmp_seq=6 ttl=255 time=18.3 ms
wrong data byte #20 should be 0x14 but was 0xf7
f7 1 55 55 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28
29 2a 2b 2c 2d 2e 2f 30 31 32 33
34 35 36 37 98 53 e9 b7 84 dc 5 8 ff ff ff ff
64 bytes from 192.168.0.254: icmp_seq=7 ttl=255 time=17.5 ms
wrong data byte #52 should be 0x34 but was 0x3
14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28
29 2a 2b 2c 2d 2e 2f 30 31 32 33
3 7e 27 13 98 53 e9 b7 84 dc 5 8 ff ff ff ff
64 bytes from 192.168.0.254: icmp_seq=8 ttl=255 time=16.7 ms
wrong data byte #52 should be 0x34 but was 0x30
14 15 16 17 18 19 1a 1b 1c 1d 1e 1f 20 21 22 23 24 25 26 27 28
29 2a 2b 2c 2d 2e 2f 30 31 32 33
30 eb f0 b7 98 53 e9 b7 84 dc 5 8 ff ff ff ff
64 bytes from 192.168.0.254: icmp_seq=11 ttl=255 time=3.5 ms
64 bytes from 192.168.0.254: icmp_seq=12 ttl=255 time=33.0 ms
wrong data byte #28 should be 0x1c but was 0x0
14 15 16 17 18 19 1a 1b 0 0 0 0 20 21 22 23 24 25 26 27 28 29
2a 2b 2c 2d 2e 2f 30 31 32 33
34 35 36 37 98 53 e9 b7 84 dc 5 8 ff ff ff ff
--- 192.168.0.254 ping statistics ---
13 packets transmitted, 7 packets received, 46% packet loss
round-trip min/avg/max = 2.8/15.9/33.0 ms
--------------
it always loose about ~ 40% of packets, if i try to do ssh to an host it
doesn't work (timeout).
If i try with a prism2 card i can get all works correctly.
here it's my lsmod output:
i# lsmod
Module Size Used by
irtty_sir 7808 1
sir_dev 15372 1 irtty_sir
irda 189792 2 irtty_sir,sir_dev
crc_ccitt 1632 1 irda
parport_pc 20512 1
lp 7944 0
parport 21312 2 parport_pc,lp
ds 14084 4
yenta_socket 18816 1
pcmcia_core 57124 2 ds,yenta_socket
ipt_REJECT 5600 1
iptable_filter 2112 1
ip_tables 16128 2 ipt_REJECT,iptable_filter
deflate 2656 0
zlib_deflate 21784 1 deflate
twofish 38304 0
serpent 13248 0
blowfish 9888 0
des 11360 0
sha256 9312 0
sha1 8608 0
md5 3552 0
crypto_null 1920 0
ipcomp 6344 0
esp4 6496 0
ah4 5152 0
vfat 11968 0
fat 40288 1 vfat
snd_ali5451 20456 0
snd_ac97_codec 70352 1 snd_ali5451
ath_pci 53056 0
ath_rate_onoe 6728 1 ath_pci
ath_hal 131184 2 ath_pci
wlan 107260 3 ath_pci,ath_rate_onoe
usblp 11072 0
usb_storage 34944 0
eepro100 26604 0
How can i make it works?
I appreciate any hints.
Regards.
|