RE: [Madwifi-users] Problem in associating in A mode
Status: Beta
Brought to you by:
otaku
From: Mikhail S. <M.S...@sn...> - 2004-10-19 06:55:57
|
Hi all, I'm not a guru but for me in AP mode Atheros generally works. May be, the problem is that You didn't set SSID This is from my test lab: /sbin/iwconfig ath0 essid Atheros mode Master channel 40 nick AP /sbin/ifconfig ath0 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255=20 And works=20 Regards, Mkhail Saykov > -----Original Message----- > From: mad...@li...=20 > [mailto:mad...@li...] On Behalf=20 > Of frederick tan > Sent: Tuesday, October 19, 2004 4:48 AM > To: frederick tan; mad...@li... > Subject: Re: [Madwifi-users] Problem in associating in A mode >=20 > Now its not working in g mode too. However, I noticed that=20 > it's working as an AP. I tried using another client(orinoco=20 > or conexant) and it can associate properly with my AP.=20 > However, when it's atheros client to atheros AP, it doesnt=20 > work. What am I doing wrong? > I'll try to check my steps. And check too if I did something=20 > wrong with the codes...=20 >=20 > Regards, > Fred >=20 > > Hello all. > >=20 > > I have a problem regarding 802.11a. My STA associates=20 > to my AP (I=20 > > think so because the correct AP address is displayed in my STA side=20 > > when I do iwconfig). However,when I try to ping my AP from=20 > my STA, and=20 > > vice-versa, the result is 100% packet loss. > >=20 > > Both my AP and STA are running in ixp425 board. > > The steps I've done is as follows: > > AP=20 > > (1) iwconfig ath0 mode Master > > (2) iwpriv ath0 mode 1 /*I think I dont have to do=20 > this cause=20 > > it defaults to 802.11a*/ > > (3) ifconfig ath0 up > > (4) ifconfig ath0 aaa.bbb.ccc.ddd =20 > >=20 > > STA > > (1) iwconfig ath0 mode Managed > > (2) iwpriv ath0 mode 1 > > (3) ifconfig ath0 up > > (4) ifconfig ath0 aaa.bbb.ccc.ddd > >=20 > > Then when I do ping, it doesn't work. It works in b and g mode. > > The versions I'm using is as follows: > > wlan: 0.8.4.2 (EXPERIMENTAL) > > ath_hal: 0.9.12.5 > > ath_rate_onoe: 1.0 > > ath_pci: 0.9.4.5 (EXPERIMENTAL) > >=20 > > Have you encountered this? I've been trying to dig on the=20 > > archives but I haven't found this problem. > > If this problem is unique to me, maybe I'm doing something wrong. = =3D( > > Thanks in advance. =3D) > > =20 > > Regards, > > Fred Tan > >=20 > > =20 > >=20 > >=20 > >=20 > >=20 > >=20 > >=20 > >=20 > >=20 > > =09 > > __________________________________ > > Do you Yahoo!? > > Yahoo! Mail Address AutoComplete - You start. We finish. > > http://promotions.yahoo.com/new_mail > >=20 > >=20 > > > ------------------------------------------------------- > > This SF.net email is sponsored by: IT Product Guide > > on ITManagersJournal > > Use IT products in your business? Tell us what you > > think of them. Give us > > Your Opinions, Get Free ThinkGeek Gift Certificates! > > Click to find out more > > > http://productguide.itmanagersjournal.com/guidepromo.tmpl > > _______________________________________________ > > Madwifi-users mailing list > > Mad...@li... > > > https://lists.sourceforge.net/lists/listinfo/madwifi-users > >=20 >=20 >=20 >=20 > =09 >=20 >=20 >=20 > ------------------------------------------------------- > This SF.net email is sponsored by: IT Product Guide on=20 > ITManagersJournal > Use IT products in your business? Tell us what you think of=20 > them. Give us > Your Opinions, Get Free ThinkGeek Gift Certificates! Click to=20 > find out more > http://productguide.itmanagersjournal.com/guidepromo.tmpl > _______________________________________________ > Madwifi-users mailing list > Mad...@li... > https://lists.sourceforge.net/lists/listinfo/madwifi-users >=20 >=20 >=20 |