[Madwifi-users] Netgear HA501/HE102 Can't Do WEP Keys?

[Tom J. <ma...@vd...>]

Help!

FC2T2 runs fine with both devices either DHCP or Static IP with *NO* key 
assignments.  Turning on the 'shared key' and making a default key 1, 2 
or 3 in the WAP does not result in a provided IP back to the laptop.

WEP on WAP is setup with with "shared key", default key of 3 (152 bits), 
and "open system".

Note /var/log/messages:
Apr  4 20:07:35 dhclient: DHCPDISCOVER on ath0 to 255.255.255.255 port 
67 interval 11
Apr  4 20:07:47 dhclient: DHCPDISCOVER on ath0 to 255.255.255.255 port 
67 interval 15
Apr  4 20:08:02 dhclient: DHCPDISCOVER on ath0 to 255.255.255.255 port 
67 interval 8
Apr  4 20:08:10 dhclient: No DHCPOFFERS received.
Apr  4 20:08:10 dhclient: Trying recorded lease 192.168.0.3
Apr  4 20:08:10 dhclient: bound: renewal in 636919 seconds.
Apr  4 20:13:40 dhclient: sit0: unknown hardware address type 776
Apr  4 20:13:42 dhclient: sit0: unknown hardware address type 776
Apr  4 20:13:42 dhclient: DHCPREQUEST on ath0 to 255.255.255.255 port 67
Apr  4 20:13:48 dhclient: DHCPREQUEST on ath0 to 255.255.255.255 port 67
etc etc

And output of iwlist:
# iwlist ath0 encryption
ath0      2 key sizes : 40, 104bits
           4 keys available :
                 [1]: xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx (128 bits)
                 [2]: off
                 [3]: off
                 [4]: off
           Current Transmit Key: [1]
           Security mode:open

Does this mean that the WAP supports only 64,128 and 152 bits, and the 
PCMCIA card only supports 40 and 104 bits?  If so, how do I 'match' both?

Any ideas?

--Tom