Menu
▾
▴
Re: [Ltsp-discuss] pxe problems
|
From: Jim M. <jam@McQuil.com> - 2005-12-30 22:53:33
|
Steve,
Sounds like you've been bitten by the dhcpd 3.0.3 problem.
take a look at this wiki page that explains the problem and the solution.
http://wiki.ltsp.org/twiki/bin/view/Ltsp/DhcpdSiaddr
Hope that takes care of it.
Jim McQuillan
jam@Ltsp.org
Steve Limkemann wrote:
> I've been using ltsp for about a year and a half with a Gentoo
> server and a couple of HP Compaq t5500's. The last Gentoo update
> attempt went very wrong and made the system unusable. I've installed
> Slackware 10.2 on the server and am trying to get ltsp 4.1 running.
>
> I've spent the last day going over everything thoroughly, reading
> the documentation, wiki and mailing list archives. The pxe loader
> does not seem to be able to find its file. The listing of the
> lts/2.4.26-ltsp-3 directory is as follows:
>
> # ls -lR
> .:
> total 4440
> -rw-r--r-- 1 root root 906616 2005-04-19 00:30 bzImage-2.4.26-ltsp-3
> -rw-r--r-- 1 root root 2560000 2005-12-30 05:28 initrd
> -rw-r--r-- 1 root root 1045287 2005-04-19 00:30 initrd-2.4.26-ltsp-3.gz
> -rw-r--r-- 1 root root 11826 2005-04-19 00:30 pxelinux.0
> drwxr-xr-x 2 root root 4096 2005-12-30 14:24 pxelinux.cfg/
>
> ./pxelinux.cfg:
> total 4
> -rw-r--r-- 1 root root 124 2005-12-30 13:19 default
>
> I gunzipped initrd-2.4.26-ltsp-3.gz and renamed it initrd just in case
> it might help.
>
>
> The output on the ltsp client screen is:
>
> CLIENT MAC ADDR: 00 0E 7F AB 11 9F GUID: (...)
> CLIENT IP: 192.168.1.33 MASK: 255.255.255.0 DHCP IP: 192.168.1.32
> GATEWAY IP: 192.168.1.1
>
> PXELINUX 2.13 2004-12-14 Copyright (C) 1994-2004 Peter Anvin
> UNDI data segment at: 00090320
> UNDI data segment size: 9710
> UNDI data segment at: 00099A30
> UNDI data segment size: 1560
> PXE entry point found (we hope) at 99A3:00F6
> My IP address seems to be C0A80121 192.168.1.33
> ip=192.168.1.33:0.0.0.0:192.168.1.1:255.255.255.0
> TFTP prefix: /lts/2.4.26-ltsp-3/
> Trying to load: pxelinux.cfg/01-00-0e-7f-ab-11-9f
> Trying to load: pxelinux.cfg/C0A80121
> Trying to load: pxelinux.cfg/C0A8012
> Trying to load: pxelinux.cfg/C0A801
> Trying to load: pxelinux.cfg/C0A80
> Trying to load: pxelinux.cfg/C0A8
> Trying to load: pxelinux.cfg/C0A
> Trying to load: pxelinux.cfg/C
> Trying to load: pxelinux.cfg/default
> Could not find kernel image: linux
> boot:
>
> It seems as though /lts/2.4.26-ltsp-3/pxelinux.0 is being loaded,
> but it doesn't seem to be able to find
> /lts/2.4.26-ltsp-3/pxelinux.cfg/default. The one thing that does look
> suspicious is the "0.0.0.0" address near the center of the screen
> output. I've added lots of -v options on the command line of in.tfptd
> and all I get out of /var/log/syslog is:
>
> Dec 30 19:53:46 in.tftpd[15464]: tftp: client does not accept options
>
> the output of /var/log/messages isn't much more helpful:
> Dec 30 14:58:15 dhcpd: DHCPDISCOVER from 00:0e:7f:ab:11:9f via eth0
> Dec 30 14:58:15 dhcpd: DHCPOFFER on 192.168.1.33 to 00:0e:7f:ab:11:9f
> via eth0
> Dec 30 14:58:17 dhcpd: DHCPREQUEST for 192.168.1.33 (192.168.1.32) from
> 00:0e:7f:ab:11:9f via eth0
> Dec 30 14:58:17 dhcpd: DHCPACK on 192.168.1.33 to 00:0e:7f:ab:11:9f via
> eth0
> Dec 30 19:58:17 in.tftpd[15468]: RRQ from 192.168.1.33 filename
> /lts/2.4.26-ltsp-3/pxelinux.0
> Dec 30 19:58:17 in.tftpd[15469]: RRQ from 192.168.1.33 filename
> /lts/2.4.26-ltsp-3/pxelinux.0
>
> I'm really stumped on this one. Thanks.
>
> Steve
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: Splunk Inc. Do you grep through log
> files
> for problems? Stop! Download the new AJAX search engine that makes
> searching your log files as easy as surfing the web. DOWNLOAD SPLUNK!
> http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
> _____________________________________________________________________
> Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto:
> https://lists.sourceforge.net/lists/listinfo/ltsp-discuss
> For additional LTSP help, try #ltsp channel on irc.freenode.net
|