Re: [Lmuse-user] Muse and python

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Yes sir...

1) deleted old source
2) checked out new source via CVS
3) ran ./autogen.sh
3) ran ./configure --enable-python=yes

Quoting Mathias Gyllengahm <lun...@gm...>:

> Hi KP!
> 
> Did you check out from scratch? Did you run ./autogen.sh?
> 
> 2009/11/11 Mr. KP <kp...@st...>:
> > I just checked out a new CVS branch and tried to compile with the
> --enable-
> > python=yes switch and I seem to be missing a file.
> >
> > In /usr/local/src/muse/muse
> >
> > after a time, I get:
> >
> > cannot find -lremote/libremote.a
> >
> > I'm on slackware so if someone could tell me what that file is part of, I
> can
> > try it down the for the equivalent slackware sources.
> >
> > Thanks
> >
> > Quoting Mathias Gyllengahm <lun...@gm...>:
> >
> >> Thanks Michael!
> >>
> >> Autoconf is certainly a mystery. Not that I understand much of it the
> >> example you show is not how it works on my machine and from what it
> >> looks like in the examples and manuals I've looked at it shouldn't be
> >> necessary to add the --enable-python switch. But it builds now, that's
> >> most important.
> >>
> >> /Mathias
> >>
> >>
> >> 2009/11/9 MST <bab...@gm...>:
> >> > Hello Mathias,
> >> >
> >> > did my testing again just now to post reliable results:
> >> > ===================================
> >> > Without a --...-python switch, ./configure ... stopps with the
> following
> >> error message:
> >> >
> >> > ...
> >> > checking for JACK... yes
> >> > checking for LASH... yes
> >> > configure: error: must use --enable-python(=yes/no) or --disable-python
> >> > ===================================
> >> > If I do ./configure ..., using the same switches and adding
> >> "--enable-python=yes" everything works flawlessly:
> >> >
> >> > ...
> >> > checking for JACK... yes
> >> > checking for LASH... yes
> >> > checking for python build information...
> >> > checking for python2.6... no
> >> > checking for python2.5... python2.5
> >> > checking for main in -lpython2.5... yes
> >> > checking python2.5/Python.h usability... yes
> >> > checking python2.5/Python.h presence... yes
> >> > checking for python2.5/Python.h... yes
> >> >  results of the Python check:
> >> >    Binary:      python2.5
> >> >    Library:     python2.5
> >> >    Include Dir: /usr/include/python2.5
> >> > ...
> >> >
> >> > Greetings,
> >> > Michael
> >> >
> >> > -------- Original-Nachricht --------
> >> >> Datum: Mon, 9 Nov 2009 08:20:42 +0100
> >> >> Von: Mathias Gyllengahm <lun...@gm...>
> >> >> An: MST <bab...@gm...>
> >> >> CC: lmu...@li...
> >> >> Betreff: Re: Muse and python
> >> >
> >> >> Hi!
> >> >>
> >> >> I can't understand that it fixed everything like that, but good that
> >> >> it did. ;-) One thing I'm wondering over is the --enable-python=yes ,
> >> >> if I understand it correctly you shouldn't need it and it should use
> >> >> it as default. Do you specifically need to add the switch like that?
> >> >>
> >> >> /Mathias
> >> >>
> >> >>
> >> >> 2009/11/9 MST <bab...@gm...>:
> >> >> > Hello Mathias,
> >> >> >
> >> >> > only for your information:
> >> >> > Without changing anything!!! on my system, your latest addition to
> the
> >> >> code compiles without any problems including the python-bindings. I
> only
> >> >> have to add the switch --enable-python=yes.
> >> >> >
> >> >> > This did not work when we had our last discussion (see below) ;-)
> >> >> >
> >> >> > Greetings,
> >> >> > Michael
> >> >> >
> >> >> > ===========================
> >> >> > Mathias,
> >> >> >
> >> >> > "...I think the package you're missing is python2.5-dev"
> >> >> >
> >> >> > No, it is installed, as a lot of other packages with the words
> "python"
> >> >> and "dev" in it.
> >> >> >
> >> >> > Regards,
> >> >> > Michael
> >> >> >
> >> >> > -------- Original-Nachricht --------
> >> >> >> Datum: Sat, 7 Nov 2009 20:31:53 +0100
> >> >> >> Von: Mathias Gyllengahm <lun...@gm...>
> >> >> >> An: MST <bab...@gm...>
> >> >> >> CC: spa...@gm..., lmu...@li...
> >> >> >> Betreff: Re: Muse CVS fails to compile
> >> >> >
> >> >> >> Thanks for your help as well! Great with fast feedback for us too.
> >> >> >> I think the package you're missing is python2.5-dev, that's where
> >> >> >> Python.h is at.
> >> >> >>
> >> >> >> 2009/11/7 MST <bab...@gm...>:
> >> >> >> > Guys, your immediate response is astonishing!
> >> >> >> >
> >> >> >> > The last changes in the code made muse CVS compilable again on my
> >> >> system
> >> >> >> which is xubuntu 8.04.1 (the python-dev as many other python
> related
> >> >> files
> >> >> >> were already installed).
> >> >> >> >
> >> >> >> > Only for your information:
> >> >> >> > Needed are either switch "--disable-python" or
> >> >> "--enable-python=yes/no",
> >> >> >> while both are generating the ./autogen message "python-bindings: no
> -
> >> >> no
> >> >> >> devel pkg". I installed a lot of python-dev packages in the
> meantime,
> >> >> don't
> >> >> >> care which is missing for now.
> >> >> >> > Without one of these switches it doesn't compile on my system.
> >> >> >> >
> >> >> >> > Thanks,
> >> >> >> > Michael
> >> >> >> >
> >> >> >> >
> >> >> >> > -------- Original-Nachricht --------
> >> >> >> >> Datum: Sat, 7 Nov 2009 18:23:17 +0100
> >> >> >> >> Von: Mathias Gyllengahm <lun...@gm...>
> >> >> >> >> An: Robert Jonsson <spa...@gm...>
> >> >> >> >> CC: MST <bab...@gm...>, lmu...@li...
> >> >> >> >> Betreff: Re: Muse CVS fails to compile
> >> >> >> >
> >> >> >> >> And another one checked in - I think this might be it!
> >> >> >> >>
> >> >> >> >> 2009/11/7 Mathias Gyllengahm <lun...@gm...>:
> >> >> >> >> > Thanks for that detailed description! And for your
> complaining,
> >> >> it's
> >> >> >> a
> >> >> >> >> > very good thing! I'm sorry I'm not good enough at these things
> to
> >> >> >> make
> >> >> >> >> > it work without problems. I changed a thing, just a test, and
> >> >> checked
> >> >> >> >> > in a new configure.ac but I'm not sure if it will work, but it
> >> >> might
> >> >> >> >> > be worth a try. I'll check into it more thoroughly tonight.
> >> >> >> >> >
> >> >> >> >> > /Mathias
> >> >> >> >> >
> >> >> >> >> >
> >> >> >> >> > 2009/11/7 Robert Jonsson <spa...@gm...>:
> >> >> >> >> >> No problem :)
> >> >> >> >> >>
> >> >> >> >> >> Do you want to test the python stuff?
> >> >> >> >> >> If you're not really interested try to compile with
> >> >> --disable-python
> >> >> >> >> >>
> >> >> >> >> >> The actual error seems to because the python-dev package is
> not
> >> >> >> >> installed.
> >> >> >> >> >> The Python.h file is not found. Could be that it is installed
> >> >> under
> >> >> >> >> another
> >> >> >> >> >> search path.
> >> >> >> >> >> What distribution are you on?
> >> >> >> >> >>
> >> >> >> >> >> Oh, please remove these switches from the configure:
> >> >> >> >> --enable-suid-install
> >> >> >> >> >> --enable-suid-build
> >> >> >> >> >>
> >> >> >> >> >> Infact you might want to try and remove all switches but
> >> >> >> --prefix=/usr.
> >> >> >> >> Let
> >> >> >> >> >> the configure script figure it out.
> >> >> >> >> >>
> >> >> >> >> >> Regards,
> >> >> >> >> >> Robert
> >> >> >> >> >>
> >> >> >> >> >> 2009/11/7 MST <bab...@gm...>
> >> >> >> >> >>>
> >> >> >> >> >>> Hello folks,
> >> >> >> >> >>>
> >> >> >> >> >>> I am sorry that I am such a nuisance, but the downloaded CVS
> >> >> today
> >> >> >> at
> >> >> >> >> >>> 15:00 UT still does not compile on my system :-(
> >> >> >> >> >>>
> >> >> >> >> >>> The ./configure finishes without an error message,
> especially
> >> >> >> >> >>> python-bindigs: yes
> >> >> >> >> >>>
> >> >> >> >> >>> I use the "power-commands" assembled from our latest
> >> discussion:
> >> >> >> >> >>> ./configure --enable-optimize --prefix=/usr --with-jack
> >> >> >> >> >>> --enable-arch=pentium4 --enable-lash --enable-shared
> >> >> --enable-vst
> >> >> >> >> >>> --enable-suid-install --enable-suid-build --enable-ladcca
> >> >> >> >> >>>
> >> >> >> >>
> >> >> >>
> >> >>
> --with-docbook-stylesheets=/usr/share/sgml/docbook/dsssl-stylesheets-1.79
> >> >> >> >> >>> ==================
> >> >> >> >> >>> Then make delivers:
> >> >> >> >> >>>
> >> >> >> >> >>> make[5]: Betrete Verzeichnis
> '/home/babarosa/muse/muse/remote'
> >> >> >> >> >>> g++ -DHAVE_CONFIG_H -I. -I../..  -I  -g -fno-exceptions
> -Wall
> >> >> -W
> >> >> >> >> >>> -D_GNU_SOURCE -D_REENTRANT   -DQT_CLEAN_NAMESPACE
> >> >> -DQT_NO_COMPAT
> >> >> >> >> -I../..
> >> >> >> >> >>> -I../../muse/widgets -I/usr/share/qt3/include -O3
> >> >> >> -fomit-frame-pointer
> >> >> >> >> >>> -ffast-math -fstrength-reduce -funroll-loops -mtune=pentium4
> >> >> >> >> -march=pentium4
> >> >> >> >> >>> -I.. -I../../synti -I../../muse/widgets -DQT_SHARED
> >> >> >> >> -DQT_THREAD_SUPPORT
> >> >> >> >> >>> -DQT_PLUGIN  -DINSTPREFIX=\"/usr\" -g  -MT pyapi.o -MD -MP
> -MF
> >> >> >> >> >>> .deps/pyapi.Tpo -c -o pyapi.o pyapi.cpp
> >> >> >> >> >>> pyapi.cpp:6:20: Fehler: Python.h: No such file or directory
> >> >> >> >> >>> pyapi.cpp:39: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:46: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:53: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:60: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:71: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:82: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:93: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:27: Warnung: »pyapiThread« definiert, aber nicht
> >> >> >> verwendet
> >> >> >> >> >>> make[5]: *** [pyapi.o] Fehler 1
> >> >> >> >> >>> make[5]: Verlasse Verzeichnis
> '/home/babarosa/muse/muse/remote'
> >> >> >> >> >>> make[4]: *** [all] Fehler 2
> >> >> >> >> >>> make[4]: Verlasse Verzeichnis
> '/home/babarosa/muse/muse/remote'
> >> >> >> >> >>> make[3]: *** [all-recursive] Fehler 1
> >> >> >> >> >>> make[3]: Verlasse Verzeichnis '/home/babarosa/muse/muse'
> >> >> >> >> >>> make[2]: *** [all] Fehler 2
> >> >> >> >> >>> make[2]: Verlasse Verzeichnis '/home/babarosa/muse/muse'
> >> >> >> >> >>> make[1]: *** [all-recursive] Fehler 1
> >> >> >> >> >>> make[1]: Verlasse Verzeichnis '/home/babarosa/muse'
> >> >> >> >> >>> make: *** [all] Fehler 2
> >> >> >> >> >>> ==================
> >> >> >> >> >>> sudo make install delivers:
> >> >> >> >> >>>
> >> >> >> >> >>> Making install in remote
> >> >> >> >> >>> make[4]: Betrete Verzeichnis
> '/home/babarosa/muse/muse/remote'
> >> >> >> >> >>> make  install-am
> >> >> >> >> >>> make[5]: Betrete Verzeichnis
> '/home/babarosa/muse/muse/remote'
> >> >> >> >> >>> g++ -DHAVE_CONFIG_H -I. -I../..  -I  -g -fno-exceptions
> -Wall
> >> >> -W
> >> >> >> >> >>> -D_GNU_SOURCE -D_REENTRANT   -DQT_CLEAN_NAMESPACE
> >> >> -DQT_NO_COMPAT
> >> >> >> >> -I../..
> >> >> >> >> >>> -I../../muse/widgets -I/usr/share/qt3/include -O3
> >> >> >> -fomit-frame-pointer
> >> >> >> >> >>> -ffast-math -fstrength-reduce -funroll-loops -mtune=pentium4
> >> >> >> >> -march=pentium4
> >> >> >> >> >>> -I.. -I../../synti -I../../muse/widgets -DQT_SHARED
> >> >> >> >> -DQT_THREAD_SUPPORT
> >> >> >> >> >>> -DQT_PLUGIN  -DINSTPREFIX=\"/usr\" -g  -MT pyapi.o -MD -MP
> -MF
> >> >> >> >> >>> .deps/pyapi.Tpo -c -o pyapi.o pyapi.cpp
> >> >> >> >> >>> pyapi.cpp:6:20: Fehler: Python.h: No such file or directory
> >> >> >> >> >>> pyapi.cpp:39: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:46: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:53: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:60: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:71: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:82: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:93: Fehler: expected constructor, destructor, or
> type
> >> >> >> >> conversion
> >> >> >> >> >>> before »*« token
> >> >> >> >> >>> pyapi.cpp:27: Warnung: »pyapiThread« definiert, aber nicht
> >> >> >> verwendet
> >> >> >> >> >>> make[5]: *** [pyapi.o] Fehler 1
> >> >> >> >> >>> make[5]: Verlasse Verzeichnis
> '/home/babarosa/muse/muse/remote'
> >> >> >> >> >>> make[4]: *** [install] Fehler 2
> >> >> >> >> >>> make[4]: Verlasse Verzeichnis
> '/home/babarosa/muse/muse/remote'
> >> >> >> >> >>> make[3]: *** [install-recursive] Fehler 1
> >> >> >> >> >>> make[3]: Verlasse Verzeichnis '/home/babarosa/muse/muse'
> >> >> >> >> >>> make[2]: *** [install] Fehler 2
> >> >> >> >> >>> make[2]: Verlasse Verzeichnis '/home/babarosa/muse/muse'
> >> >> >> >> >>> make[1]: *** [install-recursive] Fehler 1
> >> >> >> >> >>> make[1]: Verlasse Verzeichnis '/home/babarosa/muse'
> >> >> >> >> >>> make: *** [install] Fehler 2
> >> >> >> >> >>> ==================
> >> >> >> >> >>> What am I doing wrong? I am thankful for your remedies.
> >> >> >> >> >>>
> >> >> >> >> >>> Greetings,
> >> >> >> >> >>> Michael
> >> >> >> >> >>>
> >> >> >> >> >>> --
> >> >> >> >> >>> GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
> >> >> >> >> >>> Jetzt freischalten unter
> http://portal.gmx.net/de/go/maxdome01
> >> >> >> >> >>
> >> >> >> >> >>
> >> >> >> >> >
> >> >> >> >
> >> >> >> > --
> >> >> >> > Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla
> >> >> Firefox
> >> >> >> 3.5 -
> >> >> >> > sicherer, schneller und einfacher!
> >> >> http://portal.gmx.net/de/go/atbrowser
> >> >> >> >
> >> >> >
> >> >> > --
> >> >> > Jetzt kostenlos herunterladen: Internet Explorer 8 und Mozilla
> Firefox
> >> >> 3.5 -
> >> >> > sicherer, schneller und einfacher!
> >> http://portal.gmx.net/de/go/atbrowser
> >> >> >
> >> >> > --
> >> >> > DSL-Preisknaller: DSL Komplettpakete von GMX schon für
> >> >> > 16,99 Euro mtl.!* Hier klicken: http://portal.gmx.net/de/go/dsl02
> >> >> >
> >> >
> >> > --
> >> > GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
> >> > Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01
> >> >
> >>
> >>
> ------------------------------------------------------------------------------
> >> Let Crystal Reports handle the reporting - Free Crystal Reports 2008
> 30-Day
> >> trial. Simplify your report design, integration and deployment - and focus
> on
> >>
> >> what you do best, core application coding. Discover what's new with
> >> Crystal Reports now.  http://p.sf.net/sfu/bobj-july
> >> _______________________________________________
> >> Lmuse-user mailing list
> >> Lmu...@li...
> >> https://lists.sourceforge.net/lists/listinfo/lmuse-user
> >>
> >
> >
> >  ---                                                            ---
> > |                                                                  |
> > |      Studio K Productions LLC     Keith C. Perry, Exec. Producer |
> > | http://studiokproductions.com     kp...@st...  |
> > |               +1.215.525.4165     x2033                          |
> > |                                                                  |
> >  ---                                                            ---
> >
> >
> > ______________________________________
> > This email account is being hosted by:
> > VCSN, Inc : http://vcsn.com
> >
> 
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
> trial. Simplify your report design, integration and deployment - and focus on
> 
> what you do best, core application coding. Discover what's new with
> Crystal Reports now.  http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Lmuse-user mailing list
> Lmu...@li...
> https://lists.sourceforge.net/lists/listinfo/lmuse-user
> 

 ---                                                            ---
|                                                                  |
|      Studio K Productions LLC     Keith C. Perry, Exec. Producer |
| http://studiokproductions.com     kp...@st...  |
|               +1.215.525.4165     x2033                          |
|                                                                  |
 ---                                                            ---

______________________________________
This email account is being hosted by:
VCSN, Inc : http://vcsn.com