I have installed Jamulus and ASIO4all. I use a wired connection to the internet.
Using a small thumb drive type interface all works OK but I would like more control over my input level.
I purchased a Behringer UMC22. I have checked this on Audacity and the input and output are both working properly.
When I connect using the UM22 using a private or public server the input via microphone shows on LHS levels however nothing on personal mix level shows or is heard. It works on monitor of course.
The correct device and input and outputs selection has been made and show as active.
When other users are on the server I cannot hear them. They can hear me. I get no sound back from the server.
I have tried all 3 usb sockets. I have re-booted the laptop de-installed and re-installed both sets of software.
Nothing else is running in the background.
Looking on the Behringer forum it seems I am not alone. Using the BEHRINGER_2902_X64_2.8.40 ASIO driver is recommended by a user as a solution and was tried successfully by other users but it is no longer available to download. The Exe file will not run.
Can anyone help?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Although the UMC22 seems to work for some, it is apparently problematic.
That may be why it is also not in the list of recommended hardware: https://jamulus.io/wiki/Sound-Devices
Good luck,
Don
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Thanks for your reply Don. I have seen that thread. A pity the Behringer was recommended to me. Also a pity their driver has disappeared. Back to the thumb drive this afternoon.
Although the UMC22 seems to work for some, it is apparently problematic.
That may be why it is also not in the list of recommended hardware: https://jamulus.io/wiki/Sound-Devices
I have a Windows 7 64 bit laptop.
I have installed Jamulus and ASIO4all. I use a wired connection to the internet.
Using a small thumb drive type interface all works OK but I would like more control over my input level.
I purchased a Behringer UMC22. I have checked this on Audacity and the input and output are both working properly.
When I connect using the UM22 using a private or public server the input via microphone shows on LHS levels however nothing on personal mix level shows or is heard. It works on monitor of course.
The correct device and input and outputs selection has been made and show as active.
When other users are on the server I cannot hear them. They can hear me. I get no sound back from the server.
I have tried all 3 usb sockets. I have re-booted the laptop de-installed and re-installed both sets of software.
Nothing else is running in the background.
Looking on the Behringer forum it seems I am not alone. Using the BEHRINGER_2902_X64_2.8.40 ASIO driver is recommended by a user as a solution and was tried successfully by other users but it is no longer available to download. The Exe file will not run.
Can anyone help?
Hi Catherine,
Please see this thread:
https://sourceforge.net/p/llcon/discussion/533517/thread/a10703c6a0/#571f
Although the UMC22 seems to work for some, it is apparently problematic.
That may be why it is also not in the list of recommended hardware:
https://jamulus.io/wiki/Sound-Devices
Good luck,
Don
Thanks for your reply Don. I have seen that thread. A pity the Behringer was recommended to me. Also a pity their driver has disappeared. Back to the thumb drive this afternoon.
Catherine
Sent from my iPad