Hello,
I have a private server on a MacPro with Mohave. It's connected to my Nighthawk router via ethernet. I run my client on a MacBook Pro, also running Mohave, also connected to the same router. If I start the server up and connect, I might get 15 seconds of audio before the Buffers light turns red, the delay light turns yellow. Then it stays that way. I have tried to connect using the servers local ip, as well as through my cable modem ip.
I am using GigPerformer as my DAW for keys, and my mic and guitar are also fed into it via my Scarlett 6i6 audio interface. The GigPerformer output (2-ch) goes to Blackhole, and Blackhole is the input to the Jamulus client.
I did the port forwarding thing according to the docs, and my bandmate was able to connect to my network.
Is there any advice you could give as to how to I can troubleshoot this, I'd be grateful. I have connected to other servers out there, and it works. I just don't know why it isn't working in my local network.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
So all of a sudden the thing is up and running well. I'm going to need to watch closely to see if it's something else maybe hogging bandwidth in the house or something. I do have 300mbps service, but that should be a non-issue since this is all in my local network. Aside from the computers, everything else in the house is on a switch.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have just installed 3.5.4 and the server is opening the Norh Amenrican list of servers. I'm in New Zealand and I need the other list of servers. How do I get it?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello,
I have a private server on a MacPro with Mohave. It's connected to my Nighthawk router via ethernet. I run my client on a MacBook Pro, also running Mohave, also connected to the same router. If I start the server up and connect, I might get 15 seconds of audio before the Buffers light turns red, the delay light turns yellow. Then it stays that way. I have tried to connect using the servers local ip, as well as through my cable modem ip.
I am using GigPerformer as my DAW for keys, and my mic and guitar are also fed into it via my Scarlett 6i6 audio interface. The GigPerformer output (2-ch) goes to Blackhole, and Blackhole is the input to the Jamulus client.
I did the port forwarding thing according to the docs, and my bandmate was able to connect to my network.
Is there any advice you could give as to how to I can troubleshoot this, I'd be grateful. I have connected to other servers out there, and it works. I just don't know why it isn't working in my local network.
So all of a sudden the thing is up and running well. I'm going to need to watch closely to see if it's something else maybe hogging bandwidth in the house or something. I do have 300mbps service, but that should be a non-issue since this is all in my local network. Aside from the computers, everything else in the house is on a switch.
I have just installed 3.5.4 and the server is opening the Norh Amenrican list of servers. I'm in New Zealand and I need the other list of servers. How do I get it?