I have a problem with my Focusrite Scarlett 2i2 3rd Generation …
I am able to send my input to Jamulus using Input 2 only – it will not send my input from Input 1.
When I am connected to Jamulus, I can see that the input is getting into Jamulus – but there is no sound showing on my own track – and nobody in the session can hear me.
Input 2 works just fine.
Anybody have any ideas why Input 2 would work and not Input 1? (Just to clarify – I am using the same microphone, the same gain setting; the same phantom power)
Thanks.
Elise
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have a problem with my Focusrite Scarlett 2i2 3rd Generation …
I am able to send my input to Jamulus using Input 2 only – it will not send my input from Input 1.
When I am connected to Jamulus, I can see that the input is getting into Jamulus – but there is no sound showing on my own track – and nobody in the session can hear me.
Input 2 works just fine.
Anybody have any ideas why Input 2 would work and not Input 1? (Just to clarify – I am using the same microphone, the same gain setting; the same phantom power)
Thanks.
Elise
https://sourceforge.net/p/llcon/discussion/hardware/thread/f6d4fae2a2/#4c5c