Hey all. Some of you may have followed my saga in the Software Forum. I couldn't use my Behringer UFO202 for listening—because its output is hardware-wired to its input, preventing the First Rule of Jamulus (only listen to the return from the server).
Nice fix! When you posted your first post with the laborius dual-interface setup, I asked about the onboard headphone jack which works fine on a UCA202...I didn't notice that you had the UFO202. I'm sure others will appreciate this fix as well.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hey all. Some of you may have followed my saga in the Software Forum. I couldn't use my Behringer UFO202 for listening—because its output is hardware-wired to its input, preventing the First Rule of Jamulus (only listen to the return from the server).
Over there I figured out how to use a second audio interface for output. But this is a bit glitchy and introduces a bit of delay.
I thought "hmm, maybe someone knows how to modify a Behringer UFO202 to remove the pesky connect from input to output"—and sure enough, they have.
Five minutes later, I converted my UFO202 to a UCA202, and I'm in business with a much simpler (and better-sounding) Jamulus setup.
Good thing, 'cause those UCA202s are out of stock right now.
Last edit: Fred Martin 2020-05-29
Nice fix! When you posted your first post with the laborius dual-interface setup, I asked about the onboard headphone jack which works fine on a UCA202...I didn't notice that you had the UFO202. I'm sure others will appreciate this fix as well.