From: rahul K. <rah...@ya...> - 2007-05-06 09:16:53
|
I am working on 64 bit redhat AS 4 update 3. I installed diskdumputils-1.2.8 package on my machine. I configured diskdump on my machine. ================================================ $ cat /etc/sysconfig/diskdump DEVICE=/dev/sdam2 I executed folowing commands ================================================ $ service diskdump initialformat Formatting dump device: Do you want to format /dev/sdam2 (yes/NO)? yes /dev/sdam2: [100.0%] $ service diskdump start Starting diskdump: [ OK ] $ dmesg -c disk_dump: Maximum block size: 16384 disk_dump: total blocks required: 1048433 (header 3 + bitmap 38 + memory 1048392) $ tail -f /var/log/messages May 6 14:31:14 kernel: disk_dump: Maximum block size: 16384 May 6 14:31:14 kernel: disk_dump: total blocks required: 1048433 (header 3 + bitmap 38 + memory 1048392) May 6 14:31:15 diskdump: activating succeeded $ cat /proc/diskdump # sample_rate: 8 # block_order: 2 # fallback_on_err: 1 # allow_risky_dumps: 1 # dump_level: 0 # compress: 0 # total_blocks: 1048433 # ================================================ Why "cat /proc/diskdump" command does not show registered device? I tried to test diskdump functionality by executing "echo c > /proc/sysrq-trigger " command. After reboot I execute "savecore /dev/sdam2" command. But it is not successful as dump has not taken on the device. How to solve this problem? --------------------------------- Check out what you're missing if you're not on Yahoo! Messenger |