From: John O'B. <jo...@te...> - 2013-07-09 23:09:00
|
-------- Original Message -------- Subject: Re: VIP1200 Timeout Problem Date: Tue, 09 Jul 2013 16:24:51 -0600 From: John O'Brien <jo...@te...> CC: Zeb Zanowiak lir...@li... <zeb...@qb...> On 13-07-03 08:07 AM, Zeb Zanowiak wrote: > > I am running Ubuntu 12.04 with Lirc 0.9.0. I have copied the remote > configuration file to /etc/lirc, which being recognized... > > $ irsend LIST "" "" > > irsend: Motorola_VIP_1200 > > However, when send a signal to my STB, the blaster blinks, the channel > changes, then I get a timeout message. > > $ irsend SEND_ONCE Motorola_VIP_1200 ONE > > irsend: timeout > > This is the lirc.conf file I am using... > > http://lirc.sourceforge.net/remotes/motorola/VIP_1200 > > Here is my hardware.conf file... > > # /etc/lirc/hardware.conf > > # > > #Chosen Remote Control > > REMOTE="Windows Media Center Transceivers/Remotes (all)" > > REMOTE_MODULES="lirc_dev mceusb" > > REMOTE_DRIVER="" > > REMOTE_DEVICE="/dev/lirc0" > > REMOTE_SOCKET="" > > REMOTE_LIRCD_CONF="mceusb/lircd.conf.mceusb" > > REMOTE_LIRCD_ARGS="" > > #Chosen IR Transmitter > > TRANSMITTER="Microsoft Windows Media Center V2 (usb) : Motorola Cable box" > > TRANSMITTER_MODULES="lirc_dev mceusb" > > TRANSMITTER_DRIVER="" > > TRANSMITTER_DEVICE="" > > TRANSMITTER_SOCKET="" > > TRANSMITTER_LIRCD_CONF="motorola/Motorola_VIP_1200.conf" > > TRANSMITTER_LIRCD_ARGS="" > > #Chosen IR transmitter > > #TRANSMITTER="HD-PVR" > > #TRANSMITTER_MODULES="lirc_dev lirc_zilog" > > #TRANSMITTER_DRIVER="" > > #TRANSMITTER_DEVICE="/dev/lirc0" > > #TRANSMITTER_SOCKET="" > > #TRANSMITTER_LIRCD_CONF="/etc/lirc/lircd.conf" > > #TRANSMITTER_LIRCD_ARGS="" > > #Enable lircd > > START_LIRCD="true" > > #Don't start lircmd even if there seems to be a good config file > > #START_LIRCMD="false" > > #Try to load appropriate kernel modules > > LOAD_MODULES="true" > > # Default configuration files for your hardware if any > > LIRCMD_CONF="" > > #Forcing noninteractive reconfiguration > > #If lirc is to be reconfigured by an external application > > #that doesn't have a debconf frontend available, the noninteractive > > #frontend can be invoked and set to parse REMOTE and TRANSMITTER > > #It will then populate all other variables without any user input > > #If you would like to configure lirc via standard methods, be sure > > #to leave this set to "false" > > FORCE_NONINTERACTIVE_RECONFIGURATION="false" > > START_LIRCMD="" > > I would really appreciate any suggestions. > > Thanks, > > Zeb > > Try this lircd.conf begin remote name ipn330hd bits 16 flags RCMM|CONST_LENGTH eps 2 aeps 100 header 417 278 three 167 778 two 167 611 one 167 444 zero 167 278 ptrail 167 pre_data_bits 16 pre_data 0x2480 gap 18000 min_repeat 1 toggle_bit_mask 0x8000 begin codes 0 0x23402600 1 0x2340A601 2 0x23402602 3 0x2340A603 4 0x23402604 5 0x2340A605 6 0x2340A606 7 0x2340A607 8 0x23402608 9 0x2340A609 LAST 0x2340260A POWER 0x2340A60C INFO 0x2340260F CH+ 0x2340A620 CH- 0x2340A621 FF 0x23402628 REW 0x2340A629 PLAY 0x2340262C PAUSE 0x23402630 STOP 0x2340A631 RECORD 0x23402637 A 0x2340A638 B 0x2340A639 RECORDEDTV 0x23402644 FWD 0x2340A64C REPLAY 0x2340264D MENU 0x2340A654 EXIT 0x2340A655 UP 0x2340A658 DOWN 0x23402659 LEFT 0x2340A65A RIGHT 0x2340A65B OK 0x2340A65C BACK 0x2340A683 C 0x2340A686 DELETE 0x2340A69E TVVIDEO 0x234026A8 GUIDE 0x234026CC ENTER 0x234026E1 VOD 0x2340A6F0 gointeractive 0x2340A6FD end codes end remote |