atilibusb and X10 with channels vs lirc_atiusb - repost

[Michael M. <mm...@el...>]

-> Sorry, again with zipped config attached.

Hi,

preamble: I have lircd 0.8.6 (x86 Lenny) running 100% fine for quite
some time now using X10 remotes with 16 channels and lirc_atiusb Kernel
driver. (config for channels as it's included in lirc)

Now, as compiling the kernel-driver is always a little painful on
embedded platforms and I wanted to use a receiver under openwrt, I tried
atilibusb instead. (config attached)


Basically atilibusb also works fine but has one nasty issue:

- *sometimes* lirc picks up the wrong channel (with the right button!)
looks in irw:
00000014518c0000 00 BTN_PROGDOWN X10_CHAN16 <- remote with ch2!
00000014718c0000 00 BTN_PROGDOWN X10_CHAN2 <- fine
00000014718c0000 01 BTN_PROGDOWN X10_CHAN2

It happens around 1/20-50 of the keypresses, any hints or experience
from others using this appreciated.
-> will build lircd with debug now, just wanted to make sure wether this
makes sense to look at further or if it's just the config..


TIA, Michael