From: Nick M. <kno...@gm...> - 2011-03-08 05:17:41
|
On 7 March 2011 23:52, Zannyuk <zan...@nt...> wrote: > > Hi, > > Im at a loss and need someone more knowledgeable than me to help. > > All my hardware configured properly (i think) and live tv is working but my > remote isnt. The manufacturer of the tv card does provide ubuntu compatible > drivers and ive been trying to get support from their official forum without > success for a few days now, seem they dont care about their users > > Posting over there as PeterP. > http://www.buydvb.net/forum/viewtopic.php?f=12&t=61 > http://www.buydvb.net/forum/viewtopic.php?f=12&t=61 As you can see from my > grep I do see something about IR but try as I might i dont even know where > to start really. Getting the remote working would make my wife happy and > stop nagging me about not buying a settop box to go with the new satellite > dish we got installed. > > Anyway my "dmesg | grep cx88" returns as..... > > [ 12.586327] cx88/0: cx2388x v4l2 driver version 0.0.8 loaded > [ 12.586726] cx8800 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 17 (level, > low) -> IRQ 17 > [ 12.588059] cx88[0]: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 > [card=72,autodetected], frontend(s): 1 > [ 12.588061] cx88[0]: TV tuner type 4, Radio tuner type -1 > [ 12.601121] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.8 loaded > [ 13.160088] input: cx88 IR (TBS 8920 DVB-S/S2) as > /devices/pci0000:00/0000:00:08.0/0000:01:09.0/rc/rc0/input5 > [ 13.160141] rc0: cx88 IR (TBS 8920 DVB-S/S2) as > /devices/pci0000:00/0000:00:08.0/0000:01:09.0/rc/rc0 > [ 13.160147] cx88[0]/0: found at 0000:01:09.0, rev: 5, irq: 17, latency: 64, > mmio: 0xf9000000 > [ 13.160201] cx88[0]/0: registered device video0 [v4l2] > [ 13.160222] cx88[0]/0: registered device vbi0 > [ 13.160329] cx88[0]/2: cx2388x 8802 Driver Manager > [ 13.160345] cx88-mpeg driver manager 0000:01:09.2: PCI INT A -> Link[LNKB] > -> GSI 17 (level, low) -> IRQ 17 > [ 13.160351] cx88[0]/2: found at 0000:01:09.2, rev: 5, irq: 17, latency: 64, > mmio: 0xf8000000 > [ 13.199501] cx88/2: cx2388x dvb driver version 0.0.8 loaded > [ 13.199504] cx88/2: registering cx8802 driver, type: dvb access: shared > [ 13.199507] cx88[0]/2: subsystem: 8920:8888, board: TBS 8920 DVB-S/S2 > [card=72] > [ 13.199510] cx88[0]/2: cx2388x based DVB/ATSC card > [ 13.199511] cx8802_alloc_frontends() allocating 1 frontend(s) > [ 13.262872] DVB: registering new adapter (cx88[0]) Check /etc/lirc/hardware.conf and determine whether LIRC is configured to use: i) the dev/input driver; and ii) the correct IR device in /dev/input/by-id Remotes that use the dev/input driver should "just work" with the standard LIRC dev/input config file. You can check the list of available input devices using: $ ls -l /dev/input/by-id/ Your remote will be listed with reference to your satellite card or IR remote - enter this path as your LIRC device. Cheers, Nick -- Nick Morrott MythTV Official wiki: http://mythtv.org/wiki/ MythTV users list archive: http://www.gossamer-threads.com/lists/mythtv/users "An investment in knowledge always pays the best interest." - Benjamin Franklin |