From: Gregorio Gervasio\, Jr. <gt...@pa...> - 2010-12-27 20:25:20
|
After upgrading from F13 to F14, I am unable to use my CommandIR II for either receiving (no output from irw) or transmitting. Normally, I think the "A" LED turns green when lircd starts but this is not happening. package versions: kernel-2.6.35.10-72.fc14.x86_64 lirc-0.8.7-1.fc14.x86_64 lirc-libs-0.8.7-1.fc14.x86_64 lirc-0.9.0-0.1.pre1.fc14.x86_64 from updates-testing also does not work. Downgrading only lirc/lirc-libs from F13 *does* work (lirc-0.8.6-7.fc13.x86_64). Here are syslog excerpts from boot/initial startup (the messages about "CommandIR probably unplugged" do not show up when restarting lircd manually): Dec 26 02:04:20 xxx lircd-0.8.7[1878]: lircd(commandir) ready, using /var/run/lirc/lircd Dec 26 02:05:50 xxx lircd-0.8.7[1878]: accepted new client on /var/run/lirc/lircd Dec 26 02:05:50 xxx lircd-0.8.7[1878]: CommandIR driver initialized Dec 26 02:05:50 xxx lircd-0.8.7[3056]: Child Initializing CommandIR Hardware Dec 26 02:05:50 xxx lircd-0.8.7[3056]: Product identified as CommandIR II Dec 26 02:05:54 xxx kernel: [ 124.204041] hub 3-0:1.0: port 2 disabled by hub (EMI?), re-enabling... Dec 26 02:05:54 xxx kernel: [ 124.204045] usb 3-2: USB disconnect, address 2 Dec 26 02:05:54 xxx lircd-0.8.7[3056]: Read Error - CommandIR probably unplugged Dec 26 02:05:54 xxx kernel: [ 124.410018] usb 3-2: new full speed USB device using uhci_hcd and address 3 Dec 26 02:05:55 xxx kernel: [ 124.565123] usb 3-2: New USB device found, idVendor=10c4, idProduct=0003 Dec 26 02:05:55 xxx kernel: [ 124.565127] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Dec 26 02:05:55 xxx kernel: [ 124.565131] usb 3-2: Product: CommandIR USB Transceiver Dec 26 02:05:55 xxx kernel: [ 124.565133] usb 3-2: Manufacturer: CommandIR Control Technologies Dec 26 02:05:55 xxx lircd-0.8.7[3056]: No CommandIRs found Dec 26 02:05:55 xxx lircd-0.8.7[3056]: Product identified as CommandIR II Dec 26 02:05:55 xxx lircd-0.8.7[3056]: Hardware revision is 2.1. Dec 26 02:06:35 xxx kernel: [ 164.454041] hub 3-0:1.0: port 2 disabled by hub (EMI?), re-enabling... Dec 26 02:06:35 xxx kernel: [ 164.454046] usb 3-2: USB disconnect, address 3 Dec 26 02:06:35 xxx lircd-0.8.7[3056]: Read Error - CommandIR probably unplugged Dec 26 02:06:35 xxx kernel: [ 164.660018] usb 3-2: new full speed USB device using uhci_hcd and address 4 Dec 26 02:06:35 xxx kernel: [ 164.815124] usb 3-2: New USB device found, idVendor=10c4, idProduct=0003 Dec 26 02:06:35 xxx kernel: [ 164.815128] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Dec 26 02:06:35 xxx kernel: [ 164.815132] usb 3-2: Product: CommandIR USB Transceiver Dec 26 02:06:35 xxx kernel: [ 164.815134] usb 3-2: Manufacturer: CommandIR Control Technologies Dec 26 02:06:35 xxx lircd-0.8.7[3056]: No CommandIRs found Dec 26 02:06:36 xxx lircd-0.8.7[3056]: Product identified as CommandIR II Dec 26 02:41:33 xxx lircd-0.8.7[1878]: accepted new client on /var/run/lirc/lircd Dec 26 02:41:33 xxx lircd-0.8.7[1878]: removed client -- Gregorio Gervasio, Jr. |