|
From: Doug <dou...@ho...> - 2010-10-04 04:55:23
|
Matt Nelson <matt@...> writes: > > I am trying to get my lircd.conf entry for my pioneer remote working. It is for a 50" pioneer elite plasma television, Model: PRO-1150HD. At first I could not get anything to work. I finally found that if I did a "irrecord -f" I could get the power button to work, but not any other buttons. I am mainly trying to get the HDMI5 and HDMI6 buttons to work. Does anyone have any ideas for me to try? Also I know there is a few different managment ports, is there a way to change the inputs, power, or other controls over the managment port if I am unable to get lirc to work?Here is my config from irrecord:# Please make this file available to others# by sending it to <li...@ba...>## this config file was automatically generated > # using lirc-0.8.3(default) on Sun Jun 29 21:03:02 2008## contributed by ## brand: PIONEER_TV# model no. of remote control: # devices being controlled by this remote:#begin remote name PIONEER_TV flags RAW_CODES eps 30 aeps 100 ptrail 0 repeat 0 0 gap 25845 begin raw_codes > name POWER 8550 4150 600 450 650 1450 650 450 600 1500 600 450 600 1550 600 450 600 1500 600& > nbsp; 1500 600 500 600 1500 > 600 450 600 1500 600 500 600 1500 600 450 600 450 600 500 550 1550 600 1500 600 1500 600 &nb > sp; 500 600 450 > 600 450 600 1500 600 1550 600 450 600 450 600 450 600 1550 550 1550 600 1500 600 na > me INPUT1 > 8550 4150 600 450 600 1500 600 500 600 1500 600 450 600 1500 600 500 600 1500 600 1500 600 & > nbsp; 450 600 1550 > 600 450 600 1500 600 450 600 1550 600 450 600 450 600 1550 550 500 600 1500 600 1500 600 &nb > sp; 500 550 1550 > 600 450 600 1500 600 500 550 1550 600 450 600 450 600 1550 550 500 600 1500 600 &nbs > p; name INPUT2 > 100 name INPUT3 8550 4150 600 450 600 1500 600 500 600 1500 600 450 600 1500 600 500 600 > 1500 > 600 1500 600 450 600 1550 600 450 600 1500 600 500 550 1550 600 450 600 450 600 1550 550 &nb > sp; 500 600 1500 > 600 1500 600 500 550 1550 600 450 600 1500 600 500 550 1550 600 450 600 450 600 1550 550 &nb > sp; 500 600 1500 > 600 name INPUT4 8550 4150 600 450 600 1550 600 450 600 1500 600 450 600 1550 600 450 600 > 1500 > 600 1500 600 500 600 1500 600 450 600 1500 600 500 600 1500 600 450 600 450 600 1550 600 &nb > sp; 450 600 1500 > 600 1550 550 500 600 1500 600 450 600 1550 550 500 600 1500 600 450 600 450 600 1550 600 &nb > sp; 450 600 1500 > 600 name HDMI5 8550 4150 600 500 600 1500 600 450 600 1500 600 500 600 1500 600 450 600 1 > 500 > 600 1550 600 450 600 1500 600 450 600 1550 600 450 600 1500 600 500 550 500 600 1500 600 &nb > sp; 450 600 1550 > 550 1550 600 450 600 1500 600 500 550 1550 600 450 600 1500 600 500 550 500 550 1550 600 &nb > sp; 450 600 1550 > 550 name HDMI6 8550 4150 600 450 600 1550 600 450 600 1500 600 450 600 1550 600 450 600 1 > 500 > 600 1500 600 500 600 1500 600 450 600 1500 600 500 600 1500 600 450 600 450 600 1550 600 &nb > sp; 450 600 1500 > 600 1550 550 500 600 1500 600 450 600 1550 550 500 600 1500 600 450 600 450 600 1550 600 &nb > sp; 450 600 1500 > 600 name PC 8550 4150 600 450 600 1500 650 450 600 1500 600 450 600 1550 600 450 600 1500 > 600 1500 600 500 550 1550 600 450 600 1500 600 500 550 1550 600 450 600 450<SNIP!> end raw_codesend remote > > > ------------------------------------------------------------------------- > Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! > Studies have shown that voting for your favorite open source project, > along with a healthy diet, reduces your potential for chronic lameness > and boredom. Vote Now at http://www.sourceforge.net/community/cca08 Hi, Matt. Pioneer lists their remote codes here: http://www.pioneerelectronics.com/pio/pe/images/portal/cit_3424/465955361PRO1150HD_IR.pdf You could try those and see if they for you. I couldn't get LIRC working using the hex codes from Pioneer so I recorded several RAW key presses and extracted the consistent signals I saw (ignoring when LIRC missed something or only saw part of a signal). I've only recorded Input2, HDMI4, and HDMI5. I've included them below. Hopefully they will get you going. Control of the TV via the RS-232 port works great. I use EventGhost to take key presses from WinLIRC and switch inputs, change volumes, run my media centre, etc. It's easy to issue an RS-232 command from EventGhost. Pioneer also lists those: http://www.pioneerelectronics.com/pio/pe/images/portal/cit_3424/464658437PRO1150HD_RS-232C_Protocols.pdf Good Luck! Doug Here are the RS-232 codes I use: Power On \x02**pon\x03 Power Off \x02**pof\x03 Volume Up \x02**volup1\x03 Volume Down \x02**voldw1\x03 Volume Level (e.g. 20) \x02**vol020\x03 Volume Mute \x02**amts01\x03 Volume Mute Off \x02**amts00\x03 Select Source \x02**inps02\x03 \x02**inps04\x03 \x02**inps05\x03 Query Current Source \x02**inp\x03 TV Video Mute On \x02**vmts01\x03 TV Video Mute Off \x02**vmts00\x03 Query Video Mute Status \x02**vmt\x03 My LIRC config: begin remote name Pioneer1150Inputs flags RAW_CODES eps 25 aeps 100 begin raw_codes name Input2 8579 4229 561 497 566 1566 559 501 563 1566 563 490 570 1566 561 494 570 1561 566 1554 572 490 570 1565 561 501 563 1566 562 497 566 1558 568 503 565 492 574 1552 571 503 563 1562 564 1563 552 508 566 1564 560 501 564 1565 561 494 570 1558 569 492 571 494 578 1556 561 501 564 1563 567 25972 8574 4236 546 1576 548 1577 550 1574 551 1577 547 511 553 1576 551 510 555 1575 551 509 553 514 558 505 557 512 553 1574 551 510 556 1571 558 507 557 1573 552 1571 553 510 557 1573 549 1572 553 1576 549 1576 549 511 552 513 561 502 558 1569 557 507 557 508 556 513 550 513 559 1567 553 name Input4 8571 4231 553 509 555 1574 550 514 551 1573 553 511 553 1573 554 511 552 1576 553 1568 556 510 555 1570 553 514 552 1571 554 511 553 1573 554 510 557 511 553 1571 557 507 556 1570 553 1575 550 511 554 1573 554 510 553 1576 550 513 551 1574 553 510 553 514 553 1570 555 515 549 1573 554 25970 8567 4238 553 1570 555 1570 554 1570 555 1571 567 497 555 1571 554 512 551 1574 554 511 552 509 557 508 556 511 558 1568 553 513 550 1583 544 509 560 1566 556 513 551 1573 553 1573 552 1570 553 1576 552 1570 553 510 554 512 554 1569 556 515 548 512 555 510 554 512 557 508 556 1576 550 name Input5 8599 4204 583 472 589 1540 597 467 588 1533 586 482 589 1541 586 476 598 1536 582 1544 581 466 590 1547 587 483 580 1546 580 476 588 1540 589 475 588 477 591 1535 589 463 601 1540 588 1544 582 473 582 1551 584 482 581 1539 596 468 589 1537 590 481 582 477 587 1533 603 465 592 1548 578 25946 8605 4193 579 1561 573 1538 587 1539 585 1543 581 482 580 1543 576 484 581 1549 587 472 597 470 595 468 593 480 584 1524 610 467 591 1526 600 478 587 473 592 1527 598 1534 592 1540 593 1551 567 1537 586 1543 581 473 592 1542 584 473 591 483 589 467 594 472 591 482 587 464 610 1527 596 end raw_codes end remote |