Re: rc197 dublicate signals

[<li...@ba...>]

Hi!

Philipp Zeitschel "ph...@ze..." wrote:

> i'm new to lirc.
> I've got a Philips infrared adapter and a origenae rc197
>
> lsusb tells me this:
> Bus 002 Device 002: ID 147a:e017 Formosa Industrial Computing, Inc. eHome
> Infrared Receiver
>
> the setup is working, i wanna control my xbmc media center.
>
> but if i press a button i get 2-4 responses like this with irw:
> root@XBMC:~# irw
> 000000037ff07bde 00 Right mceusb
> 000000037ff07bde 00 Right mceusb
> 000000037ff07bde 00 Right mceusb
> 000000037ff07bdf 00 Left mceusb
> 000000037ff07bdf 00 Left mceusb
> 000000037ff07bdf 00 Left mceusb
> 000000037ff07be1 00 Up mceusb
>
>
> this is the configuration for the remote:
>   name        mceusb
>   bits                 16
>   flags  RC6|CONST_LENGTH
>   eps                  30
>   aeps                100
>
>   header       2667   889
>   one           444   444
>   zero          444   444
>
>   pre_data_bits        21
>   pre_data        0x37FF0
>   gap          63500
>   toggle_bit           22
>   rc6_mask    0x100000000
>

When you compare this to http://lirc.sourceforge.net/remotes/mceusb/ 
lircd.conf.mceusb then you'll see that the correct gap value is 105000  
instead of 63500. Who's messing up the config files?

Christoph