From: <li...@ba...> - 2010-07-19 19:51:39
|
Hi! Jarod Wilson "ja...@wi..." wrote: > On Mon, Jul 19, 2010 at 2:01 PM, Bruno Moreira Alves > <br...@pi...> wrote: >> Hi... recently I'm working with one of these... >> [URL="http://www.liming-electronics.com/productview.asp?id=2458"]LM-PC001[/ >> URL] >> >> it works via /dev/input/event4, so I'm using devinput driver for lirc, >> the thing is, it works flawlessy when lirc is not running, (via >> linux-input-layer) but I do need to make it work with lirc... >> >> I can make work almost everything using this lircd.conf (incomplete >> here) >> >> # Please make this file available to others >> # by sending it to <li...@ba...> >> # >> # this config file was automatically generated >> # using lirc-0.8.6(devinput) on Fri Jul 16 12:20:55 2010 >> # >> # contributed by >> # >> # brand: lm.conf >> # model no. of remote control: >> # devices being controlled by this remote: > I'd suggest using > http://lirc.cvs.sourceforge.net/viewvc/lirc/lirc/remotes/devinput/lircd.conf > .devinput?view=log as your base, see if things aren't improved. Works just > fine for me w/a remote that also has mouse abilities. You need 0.8.7 for the 64 bit config to work. But 0.8.7 forwards all mouse input to uinput. So the source needs to be modified to enable the behaviour the OP wants. Christoph |