From: <li...@ba...> - 2010-02-28 08:19:56
|
Hi! wejacobs "wej...@be..." wrote: [...] > 1. One of the LIRC supported hardware interfaces uses DTR on a serial > port. The Intel hardware reference design does not have a serial port. > However there are plenty of GPIO ports available. I assume a small software > change is possible to use a GPIO pin instead of DTR? If you look at the code, you'll see that the NSLU2 already uses a GPIO pin. > 2. There appears to be a large library of remote codes for all the > various TV, etc. remotes out there. Is this as rich as it seems? It's all user contributed. No quality assurance possible... > 3. How robust is the DTR hardware solution? I wouldn't recommend using bit-banging solutions like these because during transmit you _have to_ block all IRQs. Christoph |