From: Jarod W. <ja...@wi...> - 2009-08-19 18:40:56
|
On Aug 19, 2009, at 2:27 PM, Josu Lazkano wrote: > Thank you very much Jarod. I don't understand all, my english is poor. > > How can I see is my kernel suports lirc_mceusb2 driver? $ modinfo lirc_mceusb2 You should see a bunch of alias strings, hunt for the one with your device's ID in it. > I search for my remote on http://lirc.sourceforge.net/remotes/sony/ > but I didn't find it. I used to (with input dev) create the > lircd.conf file with this command: > > irrecord -H dev/input -d /dev/input/event10 /tmp/lircd.conf > > But now I have not the input device to create lircd.conf. Assuming your lirc_mceusb2 supports your receiver, you should have a / dev/lirc0 created when the driver loads. Then: irrecord -H default -d /dev/lirc0 /tmp/lircd.conf > I think that I need to configure first the hardware.conf but i don't > find any example to do that. I dunno, there is no hardware.conf in my distro. I think its akin to / etc/sysconfig/lirc in my distro though. Again, for the most part, defaults should work just fine there. -- Jarod Wilson ja...@wi... |