From: Michael B. <mi...@br...> - 2009-03-15 23:19:22
|
Hi, adapted my old imon-pad2keys patch for use with cvs current. It now extracts the x-/y-components from the incoming packet and feeds them into the stabilize() function. Generated codes are the same as for the newer imon- devices (i.e. 01008000, 01007F00 ...). Pad is working again but feels a bit un-responsive. The IMON_PAD_THRESHOLD seems to be a bit to high. Maybe this one should be made user-adjustable through a module parameter? There are still many downloads of the original patch from my page (http://www.brakemeier.de/electronics/vdr/lirc-imon.html), so please, could someone be so nice and add this one to cvs? Autodetect: It seems there really exist vfd *and* lcd devices sharing the usb- id 15c2::ffdc. Is there a chance to actually probe for the correct type instead of simply looking at it's id? Regards, Michael. Am Sonntag 15 März 2009 20:01:44 schrieb Michael Brakemeier: > Hi, > > I've tried cvs current (and 0.8.5pre1) with my imon-vfd (15c2:ffdc > SoundGraph Inc. iMON PAD Remote Controller; Silverstone LC 14M with real > vfd and no wheel) but can't get the pad to work any more. Previous versions > worked more or less fine, with or without my pad2keys patch. > > mode2 --raw reports the typical values for on-board decoded pad-events, > irw simply reports nothing. > > syslog with debug enabled > -- snip -- > Mar 15 15:33:01 azrael 69 <6>62 <6>b1 <6>b7 <6>00 <6>00 <6>24 <6>01 <6> > Mar 15 15:33:01 azrael 69 <6>12 <6>a1 <6>b7 <6>00 <6>00 <6>24 <6>01 <6> > Mar 15 15:33:01 azrael 69 <6>22 <6>c1 <6>b7 <6>00 <6>00 <6>24 <6>01 <6> > Mar 15 15:33:01 azrael 69 <6>62 <6>c1 <6>b7 <6>00 <6>00 <6>24 <6>01 <6> > Mar 15 15:33:01 azrael 69 <6>62 <6>b1 <6>b7 <6>00 <6>00 <6>24 <6>01 <6> > -- snap -- > > The current code handles the remotes touchpad, but assumes totally > different codes with constant length of 5. Before I dig further into the > code and adapt my old patch - did I miss something, any configuration > changes? Is someone already working on this? > > BTW, autodetect does not work here, have to set display_type=1 manually. > > Regards, > Michael. -- Michael Brakemeier mi...@br... "Wozu ist das?" "Das ist blaues Licht." "Was macht es?" "Es leuchtet blau." "Verstehe!" |