From: Jarod W. <ja...@wi...> - 2009-03-07 16:47:48
|
Peter Bowen wrote: > I’m a long time user, first time asker. I’ve used lirc with a homebrew > serial and iMON VFD, so I felt comfortable trying out the LCD. After > searching google, fighting with modules, and finally having limited > success, I guess it’s time to ask for help. > > I have the Siverstone version of the original iMON LCD, and I’ve been > able to get the LCD part working with lcdproc so I know I can > communicate, but the remote is killing me. Here’s what I’ve done so far... > > Downloaded, built and installed the stock 8.0.4a. It creates the > devices and the syslog looks fine. When I run mode2, it tells me to run > it in raw mode. No matter what I do, I don’t get any output. > > Downloaded, built and installed cvs HEAD. I have the same problem. > > I’m using the matching remote. > > I seem to remember howto somewhere that had instructions on getting into > the guts and watching the raw stream, and if someone can point me to > that, I’m willing to do a bit more legwork. I don’t have an > oscilloscpe, but I do have a multimeter, so I can do some basic poking > around if need be. I’ve read through the FAQ and did a quick browse of > the list archive, but without a search, it was a bit rough. I’m totally > willing to RTFM if you can point me in the right direction. Thank you > in advance for any help. Rather than trying to recreate the wheel, i.e. a config file for your remote, try some of the config files in <lirc src>/remotes/imon/. --jarod |