|
From: Travis T. <tr...@ta...> - 2009-01-25 07:22:59
|
I think I've got some better data coming in now. I copied one button press
worth below. I dropped the divider on the PIC and sampled at 32.768Khz then
just divided by 2 in the driver.
irrecord will map buttons if I give it the RC-6.conf file to start from. If
I create my own, it says it can't find a toggle bit. It doesn't seem to try
very hard though, it fails right when I push the button the first time. I
would think I'd need to push it at least twice for a toggle to switch. I'm
wondering if it's catching a repeat. I also tried with an RC-5 remote. It
doesn't give me the error about the toggle bits, but it doesn't seem to find
them either.
-------------------------------
begin remote
name test.conf
bits 13
flags RC5
eps 30
aeps 100
one 903 848
zero 903 848
plead 911
gap 996063
toggle_bit_mask 0x0
begin codes
1 0x1781
2 0x1F82
3 0x1783
end codes
end remote
begin remote
name RC-6.conf.conf
bits 21
flags RC6|CONST_LENGTH
eps 30
aeps 100
header 2667 889
one 444 444
zero 444 444
gap 108000
toggle_bit_mask 0x0
rc6_mask 0x10000
begin codes
OK 0x0FFBA3
1 0x0EFBFE
2 0x0FFBFD
3 0x0EFBFC
4 0x0FFBFB
5 0x0EFBFA
6 0x0FFBF9
end codes
end remote
space 847137
pulse 2685
space 854
pulse 427
space 854
pulse 427
space 396
pulse 427
space 427
pulse 457
space 854
pulse 885
space 427
pulse 427
space 396
pulse 427
space 427
pulse 457
space 427
pulse 457
space 427
pulse 885
space 854
pulse 457
space 427
pulse 457
space 427
pulse 457
space 427
pulse 427
space 396
pulse 427
space 396
pulse 457
space 427
pulse 457
space 427
pulse 457
space 427
pulse 885
|