Re: No devices with atilibusb

[<li...@ba...>]

Hi!

EJS "ej...@ya..." wrote:
[...]
>> This is correct behaviour. As atilibusb is a userspace driver, no kernel
>> module or device is required.

> Thank you. I was wondering if that were the case. Then based on this, what
> parameters should I be using to start lircd?  I tried many variations, but
> they were all similar to: lircd --driver=atilibusb
> /usr/share/lirc-remotes/atiusb/lircd.conf.atilibusb

>> From there I could connect with irw, but as soon as I pressed a remote
>> button I would receive an error. Please see below:

> lircd-0.8.4a[8133]: lircd(default) ready

Even though you say you have started lircd with the atilibusb driver, it  
is running with the default driver. Why this is the case, I cannot tell.

If the problem persists, recompile lirc from source for the atilibusb  
driver.

Christoph