Clare Tech 5000 lirc config file

[<Tom...@me...>]

Hi

I am completing the last task for my MythTV system, getting it to change 
channels on my STB.  I have used irrecord to record my remote, only 
possible in raw mode. Can I use the 'raw' mode file or does it need 
further configuration? Is there any way of telling what class of remote 
this is?
I overwrote my existing /etc/lircd.conf file with my new config file and 
have tested it using the irsend command but it fails to operate the STB, I 
have confirmed that it is emitting a signal.
I am using a Clarke Tech 5000C STB and cannot find any existing conf files 
for it, I have included my conf file below for any help anyone can offer.

Thanks TomC

# Please make this file available to others
# by sending it to <li...@ba...>
#
# this config file was automatically generated
# using lirc-0.8.3-CVS(default) on Wed Jan 14 22:25:08 2009
#
# contributed by
#
# brand:                       /home/mythtv/remoterec3.conf
# model no. of remote control:
# devices being controlled by this remote:
#

begin remote

  name   ct
  flags RAW_CODES|CONST_LENGTH
  eps            30
  aeps          100

  ptrail          0
  repeat     0     0
  gap          107212

      begin raw_codes

          name up
             9000    4450     600     500     650     500
              600     550     600    1650     600     500
              600     550     600     500     600     550
              600    1650     600    1650     600    1650
              600    1650     600    1650     600    1650
              600    1650     600     550     600    1650
              600    1650     600     550     550    1700
              550     550     600     550     600    1650
              600     500     600     550     600     550
              550    1700     600     500     600    1650
              600    1650     600     550     600    1650
              600

          name up
             8950    2250     550

          name down
             9000    2200     600

          name left
             9000    2200     600

          name right
             8950    2250     550

          name ok
             9000    2200     600

          name 1
             8950    2200     600

          name 2
             9000    2200     600

          name 3
             9000    2200     600

          name 4
             9000    2200     600

          name 5
             8950    2250     550

          name 6
             9000    2200     600

          name 7
             9000    2200     600

          name 8
             8950    2200     600

          name 9
             9000    2200     600

          name 0
             8950    2250     550

          name 10
             9000    2200     600

          name 11
             9000    4400     650     500     600     500
              650     500     600    1650     600     550
              600     500     600     550     600     500
              650    1600     650    1650     600    1650
              600    1650     600    1650     600    1650
              600    1650     600     500     600    1650
              600     550     600    1650     600     550
              600    1650     600     500     600     550
              600     500     600     550     600    1650
              600     550     600    1650     600     500
              600    1650     600    1650     600    1650
              600

      end raw_codes

end remote