Menu
▾
▴
Re: Irrecord don't detect anything but mode2 does [Output Mandriva 2008]
|
From: X-Dimension <X-D...@gm...> - 2009-01-12 19:36:48
|
And here is the output from Mandriva 2008, where irrecord is working but
irw don't
1. # ls -ld /dev/lirc*
drwxr-xr-x 2 root root 60 2009-01-12 21:09 /dev/lirc/
srw-rw-rw- 1 root root 0 2009-01-12 21:09 /dev/lircd=
prw-r--r-- 1 root root 0 2009-01-12 21:09 /dev/lircm|
Also here i start irrecord as root with:
2. # irrecord -d /dev/lirc/0 /etc/lircd.conf
3. # ps -ef | grep lirc
root 3661 1 0 21:09 ? 00:00:00 lircd --driver=default
--device=/dev/lirc/0
root 3686 1 0 21:09 ? 00:00:00 lircmd
root 5237 5201 0 21:14 pts/2 00:00:00 grep --color lirc
4. # lsmod | grep lirc
lirc_serial 13028 1
lirc_dev 12756 1 lirc_serial
5. # dmesg | grep lirc
lirc_dev: IR Remote Control driver registered, at major 61
lirc_serial: auto-detected active low receiver
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_serial: ignoring spike: 1 1 496ba38d 496ba38b 1b12d c5e9b
lirc_serial: ignoring spike: 1 1 496ba38e 496ba38b e1a8d c5e9b
lirc_serial: ignoring spike: 1 1 496ba390 496ba38b 6cc25 c5e9b
lirc_serial: ignoring spike: 1 1 496ba390 496ba390 b136a 773c5
lirc_serial: ignoring spike: 1 1 496ba390 496ba390 dc6f2 773c5
lirc_serial: ignoring spike: 1 1 496ba391 496ba390 aae14 773c5
lirc_serial: ignoring spike: 1 1 496ba391 496ba390 dccd3 773c5
6.]# grep lirc /var/log/messages
Jan 12 21:09:44 localhost kernel: lirc_dev: IR Remote Control driver
registered, at major 61
Jan 12 21:09:44 localhost kernel: lirc_serial: auto-detected active low
receiver
Jan 12 21:09:44 localhost kernel: lirc_dev: lirc_register_plugin:
sample_rate: 0
Jan 12 21:09:44 localhost lircd-0.8.3-CVS[3661]: lircd(userspace) ready
Jan 12 21:09:44 localhost lircd-0.8.3-CVS[3661]: accepted new client on
/dev/lircd
Jan 12 21:09:49 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba38d 496ba38b 1b12d c5e9b
Jan 12 21:09:50 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba38e 496ba38b e1a8d c5e9b
Jan 12 21:09:52 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba390 496b
Here is the output when pressing a button on the remote after irw is
started as root:
Jan 12 21:18:00 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba578 496ba573 ce82d 3a39a
Jan 12 21:18:01 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba579 496ba573 4c5b5 3a39a
Jan 12 21:18:03 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba57b 496ba573 9959f 3a39a
Jan 12 21:18:13 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba585 496ba580 7a65c b4f56
Jan 12 21:18:16 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba588 496ba587 75f0c c079d
Jan 12 21:18:18 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba58a 496ba589 666b3 88084
Jan 12 21:18:24 localhost lircd-0.8.3-CVS[3661]: accepted new client on
/dev/lircd
Jan 12 21:18:24 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba590 496ba58c d6f21 729ee
Jan 12 21:18:31 localhost lircd-0.8.3-CVS[3661]: removed client
Jan 12 21:18:33 localhost kernel: lirc_serial: ignoring spike: 1 1
496ba599 496ba597 3e15b 362e7
7. My /etc/lircd.conf on Mandriva 2008 and 2009 looks like this:
begin remote
name /etc/lircd.conf
flags RAW_CODES|CONST_LENGTH
eps 30
aeps 100
ptrail 0
repeat 0 0
gap 108396
begin raw_codes
name 1
8910 4599 518 517 515 516
786 521 526 513 515 512
765 512 513 1528 770 517
...and so on...
end raw_codes
end remote
8. And finally here is my /etc/sysconfig/lircd (the same on Mandriva 2008
and 2009)
# Customized settings for lirc daemon
# The hardware driver to use, run lircd --driver=? for a list
DRIVER="default"
# Hardware driver module to load
HWMOD="lirc_serial"
# with devfs enabled
DEVICE="name=Logitech?USB?Receiver"
#DEVICE=/dev/lirc/serial
# without devfs
#DEVICE=/dev/lirc
# Serial port for the receiver (for serial driver)
# COM1 (/dev/ttyS0)
COM_PORT=/dev/ttyS0
DRIVER_OPTS="irq=4 io=0x3f8"
I hope this help to find the problems on Mandriva 2009 with irrecord and
Mandriva 2008 with irw.
Am 12.01.2009, 20:05 Uhr, schrieb X-Dimension <X-D...@gm...>:
> Here is the output from Mandriva 2009 where irrecord don't work:
>
> 1. # ls -ld /dev/lirc*
> drwxr-xr-x 2 root root 60 2009-01-12 19:20 /dev/lirc/
> srw-rw-rw- 1 root root 0 2009-01-12 19:20 /dev/lircd=
>
> My lirc device is /dev/lirc/0 so i started irrecord with this parameters
> as root:
>
> 2. # irrecord -d /dev/lirc/0 /etc/lircd.conf
>
> 3. # ps -ef | grep lirc
> root 2632 1 0 19:20 ? 00:00:00 lircd --driver=default
> --device=name=Logitech?USB?Receiver
> root 4080 3969 0 19:41 pts/0 00:00:00 grep --color lirc
>
> 4. # lsmod | grep lirc
> lirc_serial 18472 0
> lirc_dev 17480 1 lirc_serial
>
> 5. # dmesg | grep lirc
> lirc_dev: IR Remote Control driver registered, major 61
> lirc_serial: auto-detected active low receiver
> lirc_dev: lirc_register_plugin: sample_rate: 0
>
> 6. # grep lirc /var/log/messages
> Jan 12 19:20:54 HTPC udevd-event[2590]: rename(/dev/lirc.udev-tmp,
> /dev/lirc) failed: Is a directory
> Jan 12 19:20:54 HTPC lircd-0.8.4[2632]: lircd(default) ready
> Jan 12 19:20:54 HTPC kernel: lirc_dev: IR Remote Control driver
> registered, major 61
> Jan 12 19:20:54 HTPC kernel: lirc_serial: auto-detected active low
> receiver
> Jan 12 19:20:54 HTPC kernel: lirc_dev: lirc_register_plugin:
> sample_rate: 0
> Jan 12 19:34:12 HTPC lircd-0.8.4[2632]: accepted new client on /dev/lircd
> Jan 12 19:34:12 HTPC lircd-0.8.4[2632]: could not get file information
> for
> name=Logitech?USB?Receiver
> Jan 12 19:34:12 HTPC lircd-0.8.4[2632]: default_init(): No such file or
> directory
> Jan 12 19:34:12 HTPC lircd-0.8.4[2632]: Failed to initialize hardware
> Jan 12 19:54:28 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91e4
> 496b91e3 532ad 84807
> Jan 12 19:54:30 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91e6
> 496b91e3 21899 84807
> Jan 12 19:54:31 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91e7
> 496b91e3 6d27f 84807
> Jan 12 19:54:34 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91ea
> 496b91e3 2d573 84807
> Jan 12 19:54:34 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91ea
> 496b91e3 6785b 84807
> Jan 12 19:54:36 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91ec
> 496b91eb a8e5b c6adf
> Jan 12 19:54:41 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91f1
> 496b91f1 2befe 167cd
> Jan 12 19:54:41 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91f1
> 496b91f1 3cc9d 167cd
> Jan 12 19:54:48 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91f8
> 496b91f5 3eed1 a3a58
> Jan 12 19:54:51 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91fb
> 496b91f5 80b7e a3a58
> Jan 12 19:54:54 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91fe
> 496b91f5 11cc0 a3a58
> Jan 12 19:54:54 HTPC kernel: lirc_serial: ignoring spike: 1 1 496b91fe
> 496b91f5 75f70 a3a58
>
> -> The "ignoring spike" lines are produced when pressing a button on the
> remote control after starting "irrecord -d /dev/lirc/0 /etc/lircd.conf"
>
> I will give you the output from Mandriva 2008, where irrecord works, but
> irw don't later this evening.
>
> Stay tuned!
>
> Am 11.01.2009, 22:28 Uhr, schrieb Jay Jaeger <cu...@ch...>:
>
>> At 08:31 PM 1/11/2009 +0100, you wrote:
>>
>>> But with Mandriva 2008 i586 i ran into the next problem now.
>>> I created my /etc/lircd.conf successfully with irrecord, lircd works
>>> fine
>>> but irw gives me no output.
>>>
>>> Can anybody help me to get my remote work?
>>
>> When I last ran into that, it was a problem in the lircd.conf file (two
>> different Hauppauge remotes). Also, you might send along:
>>
>> 1) an ls -ld /dev/ld* so we can see what devices you have, their
>> permissions, etc.
>> 2) the command parameters you used with irrecord
>> 3) a ps -ef | grep lirc so we can see what is running
>> 4) an lsmod | grep lirc so we can see what lirc modules got loaded
>>
>> Also, suggest
>>
>> a) dmesg | grep lirc
>> b) grep lirc /var/log/messages
>>
>> in case there are some clues there.
>>
>> JRJ
>
>
>
--
Powered by Mandriva Linux & Opera M2
|
